TLE5014P16DXUMA1 Infineon

TLE5014D Preface This document is an addendum to the TLE5014 datasheet and describes the TLE5014D dual die angle sensor. For all parameters which are not specified here, the TLE5014 datasheet is valid. Features Giant Magneto Resistance (GMR)-based principle Two identical dies in one package (providing channel 1 and channel 2 output) Fully redundant 2-channel solution for highest functional safety requirements High voltage and reverse polarity capability EEPROM for storage of configuration (e.g. zero angle) and customer specific ID 12 bit representation of absolute angle value on the output Max. 1 angle error over lifetime and temperature range Developed according to ISO26262 with process complying to ASIL-D Internal safety mechanisms with diagnostic coverage >97% for each channel Interfaces: PWM, SPC, SENT (based on SAE J2716-2010) 32 point look-up table to correct for systematic angle errors (e.g. magnetic circuit) 112 bit customer ID (programmable) Automotive qualified Q100, Grade 1: -40C to 125C (ambient temperature) Functional Safety Safety Manual and Safety Analysis Summary Report available on request Applications The TLE5014 GMR-based angle sensor is designed for angular position sensing in automotive applications. Fully redundancy of two chips in one package supporting highest functional safety requirements. Description Table 0-1 Derivative Ordering codes (see Chapter 4 for description of derivatives) Product Type Marking Ordering Code Package Comment TLE5014S16D 014SD SP001410046 PG-TDSO-16 SENT Interface TLE5014C16D 014CD SP001410042 PG-TDSO-16 SPC Interface TLE5014P16D 014PD SP001673472 PG-TDSO-16 PWM Interface Final Datasheet 1 Rev. 1.0 www.infineon.com 2018-04-04 TLE5014D Table of Contents 1 Pin Configuration . 3 1.1 Pin Description 3 2 Dual Sensor Angle Output . 4 3 Absolute Maximum Ratings 5 4 Pre-Configured Derivatives 6 4.1 TLE5014C16D 6 4.2 TLE5014S16D 6 4.3 TLE5014P16D 7 5 Package Information 8 5.1 Package Parameters 8 5.2 Package Outline 9 5.3 Footprint 10 5.4 Packing 10 5.5 Marking 11 6 Revision History . 12 Final Datasheet 2 Rev. 1.0 2018-04-04