TLE5x09A16(D) Analog AMR/GMR Angle Sensors Features Single and dual die sensor with AMR or GMR technology Separate supply pins for top and bottom sensor Low current consumption and quick start up 180(AMR) and 360(GMR) contactless angle measurement Output amplitude optimized for circuits with 3.3 V or 5 V supply voltage Immune to airgap variations due to MR based sensing principle Automotive qualified Q100, Grade 1: -40C to 125C (ambient temperature) Pre-amplified output signals for differential or single-ended applications Diverse redundance combination of GMR sensor and AMR sensor in one package possible High accuracy typically 0.1 overall angle error for AMR sensor Green product (RoHS compliant) Functional Safety Safety Manual and Safety Analysis Summary Report available on request. Product Validation Developed for automotive applications. Product qualification according to AEC-Q100. Potential Applications The TLE5x0916(D) angle sensors are designed for angular position sensing in safety critical automotive and non- automotive applications. Their high accuracy combined with short propagation delay make especially the GMR sensor variants suitable for systems with high speeds and high accuracy demands such as brush-less DC (BLDC) motors for actuators and electric power steering systems (EPS). The AMR sensor variants with their typically accuracy of 0.1 fit for systems with high speeds and high accuracy demands such as pedals, levers or brush-less DC (BLDC) motors with an even number of pole pairs. At the same time their fast start-up time and low overall power consumption enables the device to be employed for low-power turn counting. Extremely low power consumption can be achieved with power cycling, where the advantage of fast power on time reduces the average power consumption. Potential applications are: BLDC motors Pedals and rotary switches Steering angle sensing Valve or flap position sensing Data Sheet 1 V 2.0 www.infineon.com/sensors 2018-12 TLE5x09A16(D) Analog AMR/GMR Angle Sensor Figure 1 A usual application for TLE5x09A16(D) is the electrically commutated motor Description The TLE5x0916(D) are angle sensor with analog outputs. They detect the orientation of a magnetic field by measuring sine and cosine angle components with Magneto Resistive (MR) elements. The sensors provide analog sine and cosine output voltages that describe the magnetic angle in a range of 0 to 180 (AMR sensor), and 0 to 360 (GMR sensor), respectively. There are single die and dual die combinations with a Giant Magneto Resistance (GMR) sensor for full 360 angle range or also an Anisotropic Magneto Resistance (AMR) sensor for high precision in a top-bottom configuration in one package possible. The following derivatives of the TLE5x09A16(D) sensor family are available: Single die GMR: TLE5009A16 Dual die GMR: TLE5009A16D Single die AMR: TLE5109A16 Dual die AMR: TLE5109A16D Dual die AMR (bottom) / GMR (top): TLE5309D The differential MR bridge signals are independent of the magnetic field strength to maintain constant output voltage over a wide temperature and field range. The analog output is designed for differential or single-ended applications and an internal temperature compensation is applied for higher accuracy. The sensor is available as single die version (TLE5x09A16) and dual die version (TLE5x09A16D) for safety applications that require redundancy. The two versions are pin-compatible for easy scalability. In the dual die TLE5x09A16D, both sensor dies are supplied independently by separate supply and ground pins. Table 1 TLE5009A16(D) Derivate ordering codes Product Type Marking Ordering Code Package Description 1) TLE5009A16 E1200 09A11200 SP001285624 PG-TDSO-16 3.3 V, single die, without TCO 1) TLE5009A16 E1210 09A11210 SP001296110 PG-TDSO-16 3.3 V, single die, with TCO 1) TLE5009A16 E2200 09A12200 SP001296118 PG-TDSO-16 5.0 V, single die, without TCO 1) TLE5009A16 E2210 09A12210 SP001296114 PG-TDSO-16 5.0 V, single die, with TCO 1) TLE5009A16D E1200 09A21200 SP001285628 PG-TDSO-16 3.3 V, dual die, without TCO 1) TLE5009A16D E1210 09A21210 SP001296122 PG-TDSO-16 3.3 V, dual die, with TCO Data Sheet 2 V 2.0 2018-12