TLE6208-3G Infineon

Triple Half Bridges TLE 6208-3 G 1Overview 1.1 Features Three Half-Bridges Optimized for DC motor management applications Delivers up to 0.6 A continuous, 1.2 A peak current R typ. 0.8 , 25 C per switch DS ON PG-DSO-14-35 Output: short circuit protected and diagnosis Enhanced Power Overtemperature-Protection with hysteresis and diagnosis Standard SPI-Interface/Daisy chain capable Very low current consumption in stand-by (Inhibit) mode (typ. 10 A for power and 2 A for logic supply, 25 C) Over- and Undervoltage-Lockout CMOS/TTL compatible inputs with hysteresis No crossover current Internal clamp diodes Enhanced power P-DSO-Package Programming compatibility to the TLE 5208-6 Green Product (RoHS compliant) AEC Qualified Type Package TLE 6208-3 G PG-DSO-14-35 Functional Description The TLE 6208-3 G is a fully protected Triple-Half-Bridge-Driver designed specifically for automotive and industrial motion control applications. The part is based on the Siemens power technology SPT which allows bipolar and CMOS control circuitry in accordance with DMOS power devices existing on the same monolithic circuitry. In motion control up to 2 actuators (DC-Motors) can be connected to the 3 halfbridge- outputs (cascade configuration). Operation modes forward (cw), reverse (ccw), brake and high impedance are controlled from a standard SPI-Interface. The possibility to control the outputs via software from a central logic, allows limiting the power dissipation. So the standard P-DSO-14-package meets the application requirements and saves PCB-Board-space and cost. Furthermore the build-in features like Over- and Undervoltage-Lockout, Over-Temperature-Protection and the very low quiescent current in stand-by mode opens a wide range of automotive- and industrial-applications. Data Sheet 1 2007-09-12 TLE 6208-3 G 1.2 Pin Configuration (top view) PG-DSO-14-35 P-DSO-14-9 GND 1 14 GND OUT 3 2 13 OUT 1 Leadframe V 3 12 OUT 2 S Chip CSN 4 11 V CC 5 DI 10 INH 6 9 CLK DO 7 8 GND GND AEP02438 Figure 1 Data Sheet 2 2007-09-12