TLE6250 High Speed CAN-Transceiver Features CAN data transmission rate up to 1 Mbit/s Receive-only mode and Stand-by mode Suitable for 12 V and 24 V applications Excellent EMC performance (very high immunity and very low emission) Versions for 5 V and 3.3 V microcontrollers Bus pins are short circuit proof to ground and battery voltage Overtemperature protection Very wide temperature range (-40C up to 150C) Green Product (RoHS compliant) Potential applications Engine control unit (ECUs) Transmission control units (TCUs) Chassis control modules Electric power steering Product validation Qualified for automotive applications. Product validation according to AEC-Q100. Description The HS CAN-transceivers of the TLE6250 family are monolithic integrated circuits that are available as bare die as well as in a PG-DSO-8 package with the same functionality. The transceivers are optimized for high speed differential mode data transmission in automotive applications and industrial applications and they are compatible to ISO 11898. The transceivers work as an interface between the CAN protocol controller and the physical differential bus in both 12 V systems and 24 V systems. The transceivers are based on the Smart Power Technology (SPT), which allows bipolar and CMOS control circuitry in accordance with DMOS power devices to coexist in the monolithic circuit. The TLE6250 is designed to withstand the severe conditions of automotive applications and provides excellent EMC performance. TLE6250G 5 V logic I/O version: RxD, TxD, INH, RM. Two control pins (RM, INH) and three operation modes: Normal mode, Stand-by mode and Receive-only mode. Datasheet Rev. 4.11 www.infineon.com/automotive-transceivers 1 2019-07-15 TLE6250 High Speed CAN-Transceiver The functions and parameters of the TLE6250G and TLE6250C are identical, except those related to the package. In this document the content for TLE6250G also applies to TLE6250C, unless otherwise stated. TLE6250GV33 3.3 V logic I/O version (logic I/O voltage adaptive to V pin in the range of 3.3 V to 5 V): RxD, TxD, INH. One 33V control pin (INH) and two operation modes: Normal mode and Standby mode. The functions and parameters of theTLE6250GV33 and TLE6250CV33 are identical, except those related to the package. In this document the content for TLE6250GV33 also applies to TLE6250CV33, unless otherwise stated. Type Package Marking TLE6250G PG-DSO-8 TLE6250 TLE6250C (chip) TLE6250GV33 PG-DSO-8 TLE6250V33 TLE6250CV33 (chip) Datasheet 2 Rev. 4.11 2019-07-15