TLE6365GXUMA1 Infineon

Step Down Voltage Regulator with Reset TLE 6365 Features Step down converter Supply Over- and Under-Voltage-Lockout Low Output voltage tolerance Output Overvoltage Lockout Output Under-Voltage-Reset with delay P/PG-DSO-8-3, -6, -7, -8, -9 Overtemperature Shutdown Wide Ambient operation range -40 C to 125 C Wide Supply voltage operation range Very low current consumption Very small PG-DSO-8 SMD package Green Product (RoHS compliant) AEC Qualified Functional Description The TLE 6365 G is a power supply circuit especially designed for automotive applications. The device is based on Infineons power technology SPT which allows bipolar and CMOS control circuitry to be integrated with DMOS power devices on the same monolithic circuitry. The TLE 6365 G contains a buck converter and a power on reset feature to start up the system The very small PG-DSO-8 SMD package meets the application requirements. It delivers a precise 5 V fully short circuit protected output voltage. Furthermore, the build-in features like under- and overvoltage lockout for supply- and output-voltage and the overtemperature shutdown feature increase the reliability of the TLE 6365 G supply system. Type Package Marking TLE 6365 G PG-DSO-8 6365G Data Sheet 1 Rev. 1.9, 2007-07-30 TLE 6365 Pin Configuration TLE 6365 G R 1 8 V S RO 2 7 BUO BUC 3 6 BDS GND 4 5 V CC AEP03319 .VSD Figure 1 Pin Configuration (top view) Table 1 Pin Definitions and Functions Pin No. Symbol Function 1R Reference Input an external resistor from this pin to GND determines the reference current and so the oscillator / switching frequency. 2RO Reset Output open drain output from reset comparator with an internal pull-up resistor 3BUC Buck-Converter Compensation Input output of internal error amplifier for loop-compensation and therefore stability connect an external R-C-series combination to GND. 4GND Ground analog signal ground 5 V Output Voltage Input feedback input (with integrated resistor CC divider) and logic supply input external blocking capacitor necessary 7BUO Buck Converter Output source of the integrated power-DMOS 6BDS Buck Driver Supply Input voltage to drive the buck converter powerstage 8 V Supply Voltage Input buck converter input voltage external S blocking capacitor necessary. Data Sheet 2 Rev. 1.9, 2007-07-30