TLE8250SJXUMA1 Infineon

TLE8250SJ High speed CAN transceiver Features Compliant to ISO 11898-2:2016 Wide common mode range for electromagnetic immunity (EMI) Very low electromagnetic emission (EME) Excellent ESD robustness Guaranteed and improved loop delay symmetry to support CAN FD data frames up to 2 MBit/s Extended supply range on V supply CC CAN short circuit proof to ground, battery and V CC TxD time-out function Low CAN bus leakage current in power-down state Overtemperature protection Protected against automotive transients Receive-only mode and power-save mode Green Product (RoHS compliant) Certified according to latest VeLIO (Vehicle LAN Interoperability & Optimization) test requirements for the Japanese market Potential applications Engine control unit (ECUs) Transmission control units (TCUs) Chassis control modules Electric power steering Product validation Qualified for automotive applications. Product validation according to AEC-Q100. Description The TLE8250SJ is a transceiver designed for HS CAN networks in automotive and industrial applications. As an interface between the physical bus layer and the CAN protocol controller, the TLE8250SJ drives the signals to the bus and protects the microcontroller against interferences generated within the network. Based on the high symmetry of the CANH and CANL signals, the TLE8250SJ provides a very low level of electromagnetic emission (EME) within a wide frequency range. Datasheet Rev. 1.01 www.infineon.com/automotive-transceivers 1 2020-02-14 TLE8250SJ High speed CAN transceiver The TLE8250SJ fulfills or exceeds the requirements of the ISO 11898-2:2016. The TLE8250SJ provides a receive-only mode and a power-save mode. It is designed to fulfill the enhanced physical layer requirements for CAN FD and supports data rates up to 2 MBit/s. On the basis of a very low leakage current on the HS CAN bus interface the TLE8250SJ provides an excellent passive behavior in power-down state. These and other features make the TLE8250SJ exceptionally suitable for mixed supply HS CAN networks. Based on the Infineon Smart Power Technology SPT, the TLE8250SJ provides excellent ESD immunity together with a very high electromagnetic immunity (EMI). The TLE8250SJ and the Infineon SPT technology are AEC qualified and tailored to withstand the harsh conditions of the automotive environment. Three different operating modes, additional fail-safe features like a TxD time-out and the optimized output slew rates on the CANH and CANL signals, make the TLE8250SJ the ideal choice for large HS CAN networks with high data transmission rates. Type Package Marking TLE8250SJ PG-DSO-8 8250 Datasheet 2 Rev. 1.01 2020-02-14