TLE9222LCXUMA1 Infineon

TLE9222 FlexRay Transceiver 1 Overview Features Compliant with the FlexRay Electrical Physical Layer Specification version 3.0.1 and ISO 17458-4 Optimized for time triggered in-vehicle networks with data transmission PG-TSSOP-14 rates from 1 Mbit/s up to 10 Mbit/s Supports minimum bit times down to 60 ns Automatic voltage adaptation on the digital interface pins Bus failure protection and error detection Very high ESD robustness 8 kV according to IEC61000-4-2 Optimized for high Electromagnetic Compatibility (EMC) Very low emission and high immunity to interference Green Product (RoHS compliant) PG-TSON-14 AEC Qualified Modes of Operation and Wake-up Features: Low power standby operation mode with very low quiescent current consumption Remote wake-up detection via wake-up patterns and a dedicated wake-up frame Protection and Diagnostic Short-circuit protection on the bus pins Overtemperature protection Undervoltage monitoring of the V power supply and the V logic voltage level reference CC IO Error and wake-up indication on the ERRN output Status register for detailed diagnostic information through a simplified SPI interface Integrated Bus Guardian interface with enhanced safety feedback path Bus pins high impedance when device unpowered Applications Engine Management Autonomous Driving Radar Gateway Data Sheet 1 Rev. 1.3 www.infineon.com/automotive-transceivers 2018-06-15 TLE9222 FlexRay Transceiver Overview Description The TLE9222 FlexRay transceiver is designed for data transmission rates from 1Mbit/s up to 10Mbit/s according to the FlexRay Electrical Physical Layer Specification 3.0.1. The Bus Driver (BD) realizes the physical interface between a FlexRay node and the communication channel. It provides differential transmit and receive capability to the bus, allowing the node bidirectional time-multiplexed binary data stream transfer. In addition to transmit and receive functions, the TLE9222 provides low power standby operation, supply voltage monitoring (undervoltage detection) as well as bus failure detection and represents an ESD- protection barrier between the bus and the ECU. The TLE9222 supports the following FlexRay functional classes: Functional class Bus driver - bus guardian interface Functional class Bus driver logic level adaptation Functional class Bus driver remote wakeup Functional class Bus driver increased voltage amplitude transmitter In BD Standby mode the quiescent current is decreased to a minimal level while still being able to detect wake-up requests on the bus. Fail Safe features, like failure detection and the power supply monitoring, combined with an easy accessible status register support requirements for safety related applications with extended diagnostic features. The TLE9222 is internally protected against transients on the bus pins, BP and BM. This makes it possible to use the TLE9222 for implementing ECUs without additional external bus protection circuitry while fulfilling ESD and ISO pulse requirements of car manufacturers. With its excellent EMC performance the TLE9222 provides a very high immunity against RF disturbances over a broad frequency range and transmits only a minimal level of electromagnetic emission onto the bus. The TLE9222 is integrated in a RoHS compliant PG-TSSOP-14 and PG-TSON-14 package. Using the latest Infineon Smart Power Technology it is especially tailored to withstand the harsh conditions of the automotive environment and qualification according to the AEC-Q100 standard. Type Package Marking TLE9222PX PG-TSSOP-14 9222 TLE9222LC PG-TSON-14 9222 Data Sheet 2 Rev. 1.3 2018-06-15