IS25LP064A IS25LP032A 64/32Mb 3V SERIAL FLASH MEMORY WITH 133MHZ MULTI I/O SPI & QUAD I/O QPI DTR INTERFACE DATA SHEET IS25LP064A/032A 64/32Mb 3V SERIAL FLASH MEMORY WITH 133MHZ MULTI I/O SPI & QUAD I/O QPI DTR INTERFACE FEATURES Industry Standard Serial Interface Low Power with Wide Temp. Ranges - Single 2.3V to 3.6V Voltage Supply - IS25LP064A: 64Mbit/8Mbyte - 5 mA Active Read Current (typ.) - IS25LP032A: 32Mbit/4Mbyte - 10 A Standby Current (typ.) - 256 bytes per Programmable Page - 5 A Deep Power Down (typ.) - Supports standard SPI, Fast, Dual, Dual - Temp Grades: I/O, Quad, Quad I/O, SPI DTR, Dual I/O Extended: -40C to +105C (1) DTR, Quad I/O DTR, and QPI Extended+: -40C to +125C Auto Grade: up to +125C - Double Transfer Rate (DTR) option - Supports Serial Flash Discoverable Note: Parameters (SFDP) 1. Extended+ should not be used for Automotive. Advanced Security Protection High Performance Serial Flash (SPI) - Software and Hardware Write Protection - 133Mhz Fast Read at Vcc=2.7V to 3.6V - Power Supply lock protect - 104Mhz Fast Read at Vcc=2.3V to 3.6V - 4x256-Byte dedicated security area - 532MHz equivalent at QPI operation with OTP user-lockable bits - 50MHz Normal Read - 128 bit Unique ID for each device (Call - DTR (Dual Transfer Rate) up to 66MHz Factory) - Selectable dummy cycles - Configurable drive strength - Supports SPI Modes 0 and 3 (1),(2) Industry Standard Pin-out & Packages - More than 100,000 erase/program cycles - B = 8-pin SOIC 208mil - More than 20-year data retention - F = 8-pin VSOP 208mil - K = 8-contact WSON 6x5mm - L = 8-contact WSON 8x6mm Flexible & Efficient Memory Architecture (3) - M = 16-pin SOIC 300mil - Chip Erase with Uniform Sector/Block (3) - G= 24-ball TFBGA 6x8mm 4x6 Erase (4/32/64 Kbyte) - H = 24-ball TFBGA 6x8mm 5x5 (Call - Program 1 to 256 bytes per page (3) Factory) - Program/Erase Suspend & Resume - KGD (Call Factory) Notes: 1. Call Factory for other package options available. Efficient Read and Program modes 2. For the RESET pin option instead of HOLD pin, call - Low Instruction Overhead Operations Factory. - Continuous Read 8/16/32/64-Byte burst 3. For the dedicated RESET option, see the Ordering Information Wrap - Selectable burst length - QPI for reduced instruction overhead Integrated Silicon Solution, Inc.- www.issi.com 2 Rev. A 11/06/2015