CPC1511 Single-Pole, Normally Open Relay with Thermal Shutdown & Current Limiting INTEGRATED CIRCUITS DIVISION Parameter Rating Units Description Blocking Voltage 230 V P CPC1511 is a single-pole, normally open (1-Form-A) Load Current 450 mA /mA optically isolated Solid State Relay with integrated DC rms On-Resistance (max) 4 current limit and thermal shutdown features. Perfect for replacing electromechanical relays while enhancing the robustness of wireline-interface applications, the Features CPC1511 can carry loads up 450mA /mA . DC rms Integrated Active Current-Limit Protection The relay is constructed using an efficient LED for Thermal Shutdown actuation control and an integrated monolithic die High Surge Capability for the switch output. The die, fabricated in a high Linear AC or DC Operation voltage dielectrically isolated technology comprises Low Power Consumption a photodiode array, switch control with active current Clean, Bounce-free Switching limiting and thermal shutdown circuitry, and MOSFET Low Power Drive Requirements switches. CPC1511 incorporates thermal shutdown circuitry Applications for improved survivability in harsh environments, Instrumentation and is designed to pass regulatory voltage surge Elevator Load Control requirements when provided with appropriate over Fire Panels voltage protection circuitry. Security (alarms, horns, buzzers) Industrial Controls Designed specifically for environmentally demanding Medical Equipment AC or DC applications where printed circuit board Peripherals space is at a premium and additional power supplies are not available, the CPC1511 is an ideal solution. Approvals UL 508 Certified Component: File E69938 Ordering Information Part Description Block Diagram CPC1511Y 4-Pin (8-Pin Body) Power SIP Package (25/Tube) 3 AC/DC Load Pin Configuration Gate Driver 2 LED + Current Limit PV 1 LED - Control Thermal Shutdown 12 3 4 4 AC/DC Load -LED +LED AC/DC AC/DC LOAD LOAD Switching Characteristics of Pin Name Description Normally Open Devices 1 LED - Negative input to LED 2 LED + Positive input to LED Form-A 3 AC/DC Load Switch AC/DC terminal I 4 AC/DC Load Switch AC/DC terminal F 90% 10% I LOAD t t on off DS-CPC1511-R02 1 www.ixysic.comINTEGRATED CIRCUITS DIVISION CPC1511 Absolute Maximum Ratings T =25C A Absolute maximum electrical ratings are at 25C unless Parameter Ratings Units otherwise specified. Blocking Voltage (V ) 230 V DRM P Reverse Input Voltage 5 V Absolute Maximum Ratings are stress ratings. Stresses in Input LED Current excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions Continuous 50 mA beyond those indicated in the operational sections of this Peak (10ms) 0.9 A data sheet is not implied. 1 Input Power Dissipation 150 mW 2 Total Power Dissipation 1435 mW ESD, Human Body Model 4 kV Isolation Voltage, Input to Output 3750 V rms Operational Temperature -40 to +85 C Storage Temperature -40 to +125 C 1 Derate linearly 1.33 mW/C 2 Derate output linearly 14.3 mW/C Electrical Characteristics T =25C A Unless otherwise specified, minimum and maximum values are guaranteed by production testing at 25C only. Typical values are characteristic of the device at 25C, and are the result of engineering evaluations. They are provided for informational purposes only, and are not part of the manufacturing testing requirements. Operating temperature range: T = -40C to +85C. A Parameter Conditions Symbol Min Typ Max Units Output Characteristics Current Limit I =5mA, V =10V, t=2ms I 0.7 - 1.4 A F L LMT 1 On-Resistance I =5mA, I =100mA - 2.9 4 F L R ON I =5mA, I =500mA - 2.8 4 F L Off-State Leakage Current V =0V, V =230V I -- 1 A F L LEAK Switching Speeds Turn-On t 0.7 4 on I =5mA, I =100mA, V =10V - ms F L L Turn-Off t 0.11 2 off Output Capacitance I =0mA, V =1.0V, f=1MHz C - 230 - pF F L O Input Characteristics 2 Input Control Current to Activate I =100mA - 1.3 2.5 L I mA F Input Control Current to Deactivate I =1A 0.2 - - L LED Forward Voltage I =5mA V 0.9 1.22 1.5 V F F Common Characteristics Input to Output Capacitance f=1MHz C -1 - pF IO Thermal Characteristics Thermal Shutdown - T 120 132 140 C SD Thermal Impedance (Junction to Ambient) - - 70 - C/W JA Thermal Characterization Parameter - - 13 - C/W JT (Junction to Top) 1 Measurement taken within 1 second of on-time. 2 In noisy environments or for T > 60C, an input control current of 5mA is recommended. A 2 R02 www.ixysic.com