CPC1777 Single-Pole, Normally Open i4-PAC DC Power Relay INTEGRATED CIRCUITS DIVISION Characteristics Description IXYS Integrated Circuits Division and IXYS have Parameter Rating Units combined to bring OptoMOS technology, reliability V Blocking Voltage 600 P and compact size to a new family of High Power Solid State Relays. As part of this new family, the CPC1777 Load Current, T =25C: A single-pole normally open (1-Form-A) DC Solid State With 5C/W Heat Sink 4.6 Relay employs optically coupled MOSFET technology A DC No Heat Sink 1.5 to provide 2500V of input to output isolation. rms On-Resistance (max) 0.5 The optically coupled outputs, that use patented R JC 0.35 C/W OptoMOS architecture, are controlled by a highly efficient GaAIAs infrared LED. The combination of low Features on-resistance and high load current handling 4.6A Load Current with 5C/W Heat Sink capability makes this relay suitable for a variety of high DC Low 0.5On-Resistance performance DC switching applications. 600V Blocking Voltage P The unique i4-PAC package pioneered by IXYS 2500V Input/Output Isolation rms enables solid state relays to achieve the highest load Low Thermal Resistance (0.35 C/W) current and power ratings. This package features an Electrically Non-conductive Thermal Pad for Heat IXYS unique process where the silicon chips are soft Sink Applications soldered onto the Direct Copper Bond (DCB) Low Drive Power Requirements substrate instead of the usual copper leadframe. The Arc-Free With No Snubbing Circuits DCB ceramic, the same substrate used in high power No EMI/RFI Generation modules, not only provides 2500V isolation but also rms Machine Insertable, Wave Solderable very low thermal resistance (0.35C/W). Applications Industrial Controls / Motor Control Robotics Medical EquipmentPatient/Equipment Isolation Instrumentation Ordering Information Multiplexers Data Acquisition Electronic Switching Part Description I/O Subsystems CPC1777J i4-PAC Package (25 per tube) Utility Meters (Watt-Hour, Water, Gas) Transportation Equipment Switching Characteristics Aerospace/Defense Approvals Form-A UL 508 Certified Component: File E69938 Pin Configuration I F 90% 10% I LOAD 12 3 4 t t on off +- - + e3 DS-CPC1777-R06 www.ixysic.com 1CPC1777 INTEGRATED CIRCUITS DIVISION 1 Specifications 1.1 Absolute Maximum Ratings 25C Absolute maximum ratings are stress ratings. Stresses in Symbol Ratings Units excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions Blocking Voltage 600 V P beyond those indicated in the operational sections of this Reverse Input Voltage 5 V data sheet is not implied. Input Control Current 50 mA Peak (10ms) 1 A Input Power Dissipation 150 mW Isolation Voltage, Input to Output 2500 V rms Operational Temperature -40 to +85 C Storage Temperature -40 to +125 C 1.2 Electrical Characteristics 25C Parameter Conditions Symbol Minimum Typical Maximum Units Output Characteristics 1 Load Current Peak t10ms A 20 P Continuous No Heat Sink I 1.5 L -- T =25C Continuous A C 15 DC T =99C Continuous I C 2 L(99) 2 I =10mA, I =1A R On-Resistance F L -0.35 0.5 ON V =600V Off-State Leakage Current I L P LEAK -- 1 A Switching Speeds Turn-On t -8 20 on I =20mA, V =10V ms F L Turn-Off t -0.15 5 off V =25V, f=1MHz Output Capacitance C L out - 3500 - pF Input Characteristics 3 I =1A I Input Control Current to Activate L -- 10 mA F Input Dropout Current to Deactivate - I 0.6 - - mA F I =5mA Input Voltage Drop V F F 0.9 1.2 1.4 V V =5V Reverse Input Current I R -- 10 A R Input/Output Characteristics Capacitance, Input-to-Output - C I/O -1- pF 1 Higher load currents possible with proper heat sinking. 2 Measurement taken within 1 second of on-time. 3 For applications requiring high temperature operation (T > 60C) a LED drive current of 20mA is recommended. C R06 www.ixysic.com 2