CPC1786J 1000V Single-Pole, Normally Open DC-Only Power Relay INTEGRATED CIRCUITS DIVISION Characteristics Description IXYS Integrated Circuits brings OptoMOS Parameter Rating Units technology, reliability and compact size to a new family V Blocking Voltage 1000 P of High Power Solid State Relays. As part of this new family, the CPC1786J single-pole normally open Load Current, T =25C: A (1-Form-A) DC Solid State Relay employs optically With 5C/W Heat Sink 1.75 coupled MOSFET technology to provide 2500V of A rms DC No Heat Sink 0.65 input to output isolation. On-Resistance (max) 2 The optically coupled outputs, that use patented Thermal Impedance, Junction-to-Case, OptoMOS architecture, are controlled by a highly JC 0.35 C/W efficient infrared LED. The combination of low on-resistance and high load current handling Features capability makes this relay suitable for a variety of high 1.75A Load Current with 5C/W Heat Sink DC performance DC switching applications. Low 2 On-Resistance 1000V Blocking Voltage The unique i4-PAC package pioneered by IXYS P enables solid state relays to achieve the highest load 2500V Input/Output Isolation rms current and power ratings. This package features an Low Thermal Impedance: = 0.35 C/W JC IXYS unique process where the silicon chips are soft Isolated, Low Thermal Impedance Ceramic Pad for soldered onto the Direct Copper Bond (DCB) Heat Sink Applications substrate instead of the usual copper leadframe. The Low Drive Power Requirements DCB ceramic, the same substrate used in high power No EMI/RFI Generation modules, not only provides 2500V isolation but also rms Flammability Rating UL 94 V-0 very low junction-to-case thermal impedance Applications (0.35C/W). Industrial Controls / Motor Control Robotics Medical EquipmentPatient/Equipment Isolation Ordering Information Instrumentation Multiplexers Data Acquisition Part Descript io n Electronic Switching CPC1786J i4-PAC Package (25 per tube) I/O Subsystems Meters (Watt-Hour, Water, Gas) Switching Characteristics Transportation Equipment Approvals UL 508 Certified Component: File E69938 Form-A Pin Configuration I F 90% 10% 12 3 4 I LOAD +- - + t t on off e3 DS-CPC1786J-R11 www.ixysic.com 1CPC1786J INTEGRATED CIRCUITS DIVISION 1 Specifications 1.1 Absolute Maximum Ratings 25C Absolute maximum ratings are stress ratings. Stresses in Parameter Symbol Rating Unit excess of these ratings can cause permanent damage to V V Blocking Voltage 1000 the device. Functional operation of the device at conditions L P beyond those indicated in the operational sections of this V Reverse Input Voltage 5V R data sheet is not implied. Input Control Current, 100 mA I Continuous F Typical values are characteristic of the device at +25C, Peak (10ms) 1 A and are the result of engineering evaluations. They are provided for information purposes only, and are not part of P 150 mW Input Power Dissipation IN the manufacturing testing requirements. Isolation Voltage (Input to Output) V 2500 V ISO rms T Operating Temperature, Ambient -40 to +85 C A Storage Temperature - -40 to +125 C 1.2 Electrical Characteristics 25C Parameter Conditions Symbol Minimum Typical Maximum Units Output Characteristics Blocking Voltage I =1A V L 1000 - - V DRM 1 Load Current Peak t10ms A 10 P Continuous No Heat Sink I 0.65 L -- Continuous T =25C A C 6.9 DC T =99C Continuous I C L(99) 0.8 2 I =10mA, I =1A R On-Resistance F L -1.5 2 ON Off-State Leakage Current V =1000V I L P -- 1 A LEAK Switching Speeds Turn-On t on -1.9 20 I =20mA, V =10V F L ms Turn-Off t -0.08 5 off I =0mA, V =25V, f=1MHz Output Capacitance C F L -330 - pF out Input Characteristics 3 I =120mA I Input Control Current to Activate L F -- 10 mA Input Control Current to Deactivate - I 0.6 - - mA F I =10mA Input Voltage Drop V F 0.9 1.42 1.56 V F V =5V Reverse Input Current I R R -- 10 A Input/Output Characteristics V =0V, f=1MHz Capacitance, Input-to-Output C IO IO -1- pF 1 Higher load currents possible with proper heat sinking. 2 Measurement taken within 1 second of on-time. 3 For applications requiring high temperature operation (T > 60C) a minimum LED drive current of 20mA is recommended. C R11 www.ixysic.com 2