CPC1908 Single-Pole, Normally Open i4-PAC Power Relay INTEGRATED CIRCUITS DIVISION Characteristics Description IXYS Integrated Circuits Division and IXYS have Parameter Rating Units combined to bring OptoMOS technology, reliability V Blocking Voltage 60 P and compact size to a new family of high-power Solid State Relays. Load Current, T =25C: A A / A With 5C/W Heat Sink 8.5 rms DC As part of this family, the CPC1908 single-pole No Heat Sink 3.5 normally open (1-Form-A) Solid State Power Relay is On-Resistance (max) 0.3 rated for up to 8.5A continuous load current with a rms R JC 0.35 C/W 5C/W heat sink. Features The CPC1908 employs optically coupled MOSFET technology to provide 2500V of input to output 8.5A Load Current with 5C/W Heat Sink rms rms isolation. The optically coupled outputs, that use Low 0.3 On-Resistance patented OptoMOS architecture, are controlled by a 60V Blocking Voltage P highly efficient GaAIAs infrared LED. The combination 2500V Input/Output Isolation rms of low on-resistance and high load current handling Low Thermal Resistance (0.35 C/W) capability makes this relay suitable for a variety of high Electrically Non-conductive Thermal Pad for Heat performance switching applications. Sink Applications Low Drive Power Requirements The unique i4-PAC package pioneered by IXYS Arc-Free With No Snubbing Circuits enables Solid State Relays to achieve the highest load No EMI/RFI Generation current and power ratings. This package features a Machine Insertable, Wave Solderable unique IXYS process where the silicon chips are soft soldered onto the Direct Copper Bond (DCB) Applications substrate instead of the traditional copper leadframe. Industrial Controls / Motor Control The DCB ceramic, the same substrate used in high Robotics power modules, not only provides 2500V isolation, rms Medical EquipmentPatient/Equipment Isolation but also very low thermal resistance (0.35 C/W). Instrumentation Multiplexers Ordering Information Data Acquisition Electronic Switching Part Description I/O Subsystems Meters (Watt-Hour, Water, Gas) CPC1908J i4-PAC Package (25 per tube) Transportation Equipment Aerospace/Defense Switching Characteristics Approvals UL 508 Certified Component: File E69938 Form-A Pin Configuration I F 90% 10% I LOAD t t on off e3 DS-CPC1908-R08 www.ixysic.com 1CPC1908 INTEGRATED CIRCUITS DIVISION 1 Specifications 1.1 Absolute Maximum Ratings 25C Absolute maximum ratings are stress ratings. Stresses in Symbol Ratings Units excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions Blocking Voltage 60 V P beyond those indicated in the operational sections of this Reverse Input Voltage 5 V data sheet is not implied. Input Control Current 100 mA Peak (10ms) 1 A Input Power Dissipation 150 mW Isolation Voltage, Input to Output 2500 V rms Operational Temperature -40 to +85 C Storage Temperature -40 to +125 C 1.2 Electrical Characteristics 25C Parameter Conditions Symbol Minimum Typical Maximum Units Output Characteristics 1 Load Current Peak t10ms A 25 P Continuous No Heat Sink I L 3.5 -- T =25C Continuous A / A C 15 rms DC T =99C Continuous I C 3.9 L(99) 2 I =10mA, I =1A R On-Resistance F L -0.09 0.3 ON V =60V Off-State Leakage Current I L P LEAK -- 1 A Switching Speeds Turn-On t -16 20 on I =20mA, V =10V F L ms Turn-Off t off -0.17 5 V =25V, f=1MHz Output Capacitance C L out - 1100 - pF Input Characteristics 3 I =1A I Input Control Current for Activation L -- 10 mA F Input Control Current for Deactivation - I F 0.6 - - mA I =5mA Input Voltage Drop V F 0.9 1.2 1.4 V F Reverse Input Current V =5V I R -- 10 A R Input/Output Characteristics Capacitance, Input-to-Output - C I/O -1- pF 1 Higher load currents possible with proper heat sinking. 2 Measurement taken within 1 second of on-time. 3 For applications requiring high temperature operation (T > 60C), a LED drive current of 20mA is recommended. C R08 www.ixysic.com 2