KPB-3025YSGC Kingbright

3.0x2.5mm SURFACE MOUNT LED LAMP Part Number: APB3025YSGC-F01 Yellow Super Bright Green Features Descriptions z 3.0mmx2.5mm SMT LED, 1.1mm thickness. z The Yellow source color devices are made with Gallium z Bi-color,Low power consumption. Arsenide Phosphide on Gallium Phosphide Yellow Light z Wide viewing angle. Emitting Diode. z Ideal for backlight and indicator. z The Super Bright Green source color devices are made z Package : 2000pcs / reel. with Gallium Phosphide Green Light Emitting Diode. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAE5919 REV NO: V.10B DATE: MAR/17/2015 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: P.Cheng ERP: 1203000776 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 Yellow (GaAsP/GaP) 5 10 APB3025YSGC-F01 Water Clear 120 Super Bright Green (GaP) 8 15 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Yellow 590 peak Peak Wavelength nm IF=20mA Super Bright Green 565 Yellow 588 D 1 Dominant Wavelength nm IF=20mA Super Bright Green 568 Yellow 35 1/2 Spectral Line Half-width nm IF=20mA Super Bright Green 30 Yellow 20 C Capacitance pF VF=0V f=1MHz Super Bright Green 15 Yellow 2.1 2.5 VF 2 Forward Voltage V IF=20mA Super Bright Green 2.2 2.5 Yellow 10 IR Reverse Current uA VR = 5V Super Bright Green 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Yellow Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current 1 140 140 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE5919 REV NO: V.10B DATE: MAR/17/2015 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: P.Cheng ERP: 1203000776