SC10-21CGKWA Kingbright

25.4mm (1.0 INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SC10-21CGKWA Green Features Description z 1.0 inch digit height. The Green source color devices are made with AlGaInP on z Low current operation. GaAs substrate Light Emitting Diode. z Excellent character appearance. z High light output. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAM8462 REV NO: V.1A DATE: APR/10/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003069 Selection Guide Iv (ucd) 1 10mA Part No. Dice Lens Type Description Min. Typ. 52000 95000 Common Cathode, SC10-21CGKWA Green (AlGaInP) White Diffused Rt. Hand Decimal. *14000 *33000 Note: 1. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Green 574 nm IF=20mA D 1 Dominant Wavelength Green 570 nm IF=20mA 1/2 Spectral Line Half-width Green 20 nm IF=20mA C Capacitance Green 15 pF VF=0V f=1MHz Forward Voltage 4.2 5.0 VF 2 Green V IF=20mA (DP) (2.1) (2.5) Reverse Current 10 VR=5V IR Green uA (Per chip) (10) (VR=5V) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 150 mW (DP) (75) DC Forward Current 30 mA Peak Forward Current 1 150 mA Reverse Voltage 5 V (Per chip) (5) Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAM8462 REV NO: V.1A DATE: APR/10/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003069