High Voltage MLC Chips For 600V to 5000V Application High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chips capacitors meet these performance characteristics and are designed for applications such as snubbers in high frequency power con- verters, resonators in SMPS, and high voltage coupling/DC blocking. These high voltage chip designs exhibit low ESRs at high frequencies. Larger physical sizes than normally encountered chips are used to make high voltage chips. These larger sizes require that special precautions be taken in applying these chips in surface mount assemblies. This is due to differences in the coefficient of thermal expansion (CTE) between the substrate materials and chip capacitors. Apply heat at less than 4C per second during the preheat. Maximum preheat temperature must be within 50C of the soldering temperature. The solder temperature should not exceed 230C. Chips 1808 and larger to use reflow soldering only. Capacitors with X7R Dielectrics are not intended for AC line filtering applications. Contact plant for recommendations. Capacitors may require protective surface coating to prevent external arcing. HOW TO ORDER 1808 A A 271 K A 1 1A Packaging/Marking** AVXVoltage Temperature Capacitance Code Capacitance Failure Termination* ME = 7 Reel Style 600V = C Coefficient (2 significant digits Tolerance Rate 1 = Pd/Ag Marked 1206 1000V = A C0G = A + no. of zeros) C0G: J = 5% A = Not T = NiGuard 1210 1500V = S X7R = C Examples: K = 10% Applicable Nickel RE = 13 Reel 1808 2000V = G 10 pF = 100 M = 20% Barrier Marked 1812 2500V = W 100 pF = 101 X7R: K = 10% Solder BE = Bulk/Marked 1825 3000V = H 1,000 pF = 102 M = 20% Plate 1A = 7 Reel 2220 4000V = J 22,000 pF = 223 Z = +80%, -20% Unmarked 2225 5000V = K 220,000 pF = 224 3A = 13 Reel 3640 1 F =105 Unmarked 9A = Bulk/Unmarked *Note: Leaded terminations are available. Styles 1825, 2225, & 3640 are available with N, L or J leads as seen on page 9. V denotes uncoated leaded units similar to SM0 product. W denotes leaded epoxy coated units similar to SM5 product. IE 1825AA103KAV00J would be uncoated leaded part with J style leads. **Note: Style 1808 cannot have the marking oriented in tape & reel packaging due to square cross-section of chip. Unmarked product is standard. W L T t DIMENSIONS millimeters (inches) SIZE 1206 1210 1808* 1812* 1825* 2220* 2225* 3640* (L) Length 3.20 0.2 3.20 0.2 4.57 0.25 4.50 0.3 4.50 0.3 5.7 0.4 5.72 0.25 9.14 0.25 (0.126 0.008) (0.126 0.008) (0.180 0.010) (0.177 0.012) (0.177 0.012) (0.224 0.016) (0.225 0.010) (0.360 0.010) (W) Width 1.60 0.2 2.50 0.2 2.03 0.25 3.20 0.2 6.40 0.3 5.0 0.4 6.35 0.25 10.2 0.25 (0.063 0.008) (0.098 0.008) (0.080 0.010) (0.126 0.008) (0.252 0.012) (0.197 0.016) (0.250 0.010) (0.400 0.010) (T) Thickness 1.52 1.70 2.03 2.54 2.54 3.3 2.54 2.54 Max. (0.060) (0.067) (0.080) (0.100) (0.100) (0.130) (0.100) (0.100) (t) terminal min. 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.76 (0.030) max. 0.75 (0.030) 0.75 (0.030) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.52 (0.060) *Reflow Soldering Only 42High Voltage MLC Chips For 600V to 5000V Applications C0G Dielectric Performance Characteristics Capacitance Range 10 pF to 0.047 F (25C, 1.0 0.2 Vrms at 1kHz, for 1000 pF use 1 MHz) Capacitance Tolerances 5%, 10%, 20% Dissipation Factor 0.1% max. (+25C, 1.0 0.2 Vrms, 1kHz, for 1000 pF use 1 MHz) Operating Temperature Range -55C to +125C Temperature Characteristic 0 30 ppm/C (0 VDC) Voltage Ratings 600, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 VDC (+125C) Insulation Resistance (+25C, at 500 VDC) 100K M min. or 1000 M - F min., whichever is less Insulation Resistance (+125C, at 500 VDC) 10K M min. or 100 M - F min., whichever is less Dielectric Strength 120% rated voltage for 5 seconds at 50 mA max. current HIGH VOLTAGE C0G CAPACITANCE VALUES VOLTAGE 1206 1210 1808 1812 1825 2220 2225 3640 min. 100 pF 100 pF 100 pF 100 pF 1000 pF 1000 pF 1000 pF 1000 pF 600 max. 680 pF 1500 pF 2700 pF 5600 pF 0.012 F 0.012 F 0.015 F 0.047 F min. 10 pF 100 pF 100 pF 100 pF 100 pF 1000 pF 1000 pF 1000 pF 1000 max. 470 pF 820 pF 1500 pF 2700 pF 6800 pF 0.010 F 0.010 F 0.018 F min. 10 pF 100 pF 10 pF 10 pF 100 pF 1000 pF 1000 pF 100 pF 1500 max. 150 pF 330 pF 470 pF 1000 pF 2700 pF 2700 pF 3300 pF 8200 pF min. 10 pF 10 pF 10 pF 10 pF 100 pF 1000 pF 1000 pF 100 pF 2000 max. 68 pF 150 pF 270 pF 680 pF 1800 pF 2200 pF 2200 pF 5600 pF min. 10 pF 10 pF 10 pF 100 pF 100 pF 100 pF 2500 max. 150 pF 390 pF 1000 pF 1000 pF 1200 pF 3900 pF min. 10 pF 10 pF 10 pF 10 pF 10 pF 100 pF 3000 max. 100 pF 330 pF 680 pF 680 pF 820 pF 2200 pF min. 10 pF 10 pF 10 pF 10 pF 10 pF 100 pF 4000 max. 39 pF 100 pF 220 pF 220 pF 330 pF 1000 pF min. 10 pF 5000 max. 680 pF X7R Dielectric Performance Characteristics Capacitance Range 10 pF to 0.56 F (25C, 1.0 0.2 Vrms at 1kHz) Capacitance Tolerances 10% 20% +80%, -20% Dissipation Factor 2.5% max. (+25C, 1.0 0.2 Vrms, 1kHz) Operating Temperature Range -55C to +125C Temperature Characteristic 15% (0 VDC) Voltage Ratings 600, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 VDC (+125C) Insulation Resistance (+25C, at 500 VDC) 100K M min. or 1000 M - F min., whichever is less Insulation Resistance (+125C, at 500 VDC) 10K M min. or 100 M - F min., whichever is less Dielectric Strength 120% rated voltage for 5 seconds at 50 mA max. current HIGH VOLTAGE X7R MAXIMUM CAPACITANCE VALUES VOLTAGE 1206 1210 1808 1812 1825 2220 2225 3640 min. 1000 pF 1000 pF .01 F .01 F .01 F .01 F .01 F .01 F 600 max. 0.015 F 0.027 F 0.033 F 0.068 F 0.15 F 0.15 F 0.22 F 0.56 F min. 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF .01 F .01 F .01 F 1000 max. 4700 pF 0.010 F 0.015 F 0.027 F 0.068 F 0.068 F 0.082 F 0.22 F min. 100 pF 100 pF 100 pF 100 pF 1000 pF 1000 pF 1000 pF .01 F 1500 max. 1200 pF 2700 pF 3900 pF 8200 pF 0.018 F 0.022 F 0.027 F 0.068 F min. 10 pF 100 pF 100 pF 100 pF 100 pF 1000 pF 1000 pF 1000 pF 2000 max. 470 pF 1000 pF 1800 pF 4700 pF 8200 pF 0.010 F 0.012 F 0.027 F min. 10 pF 10 pF 100 pF 1000 pF 1000 pF 1000 pF 2500 max. 1200 pF 2200 pF 5600 pF 6800 pF 8200 pF 0.022 F min. 10 pF 10 pF 100 pF 1000 pF 1000 pF 1000 pF 3000 max. 560 pF 1200 pF 2700 pF 3300pF 4700 pF 0.018 F min. 100 pF 4000 max. 6800 pF min. 100 pF 5000 max. 3300 pF 43
