Multilayer Organic (MLO ) Diplexers MLO Diplexers 0805 CDMA MLO TECHNOLOGY The 0603 diplexer is a best in class low profile multilayer organic passive device that is based on AVXs patented multilayer organic high density interconnect technology. The MLO diplexer uses high dielectric constant and low loss materials to realize high Q passive printed elements such as inductors, and capacitors in a multilayer stack up. The MLO diplexers can support multiple wireless standards such as WCDMA, CDMA, WLAN, GSM, and BT. These diplexers are less than 0.5mm in height and are ideally suited for band switching for dual band systems. All diplexers are expansion matched to printed circuit boards thereby resulting in improved reliability vs. ceramic and Si components. APPLICATIONS Multiband applications including WCDMA, WLAN, WiMax, GPS, and cellular bands LAND GRID ARRAY ADVANTAGES Low Insertion Loss Excellent Solderability Low Parasitics Low Profile HOW TO ORDER COMPONENT DIMENSIONS AND FUNCTIONS DP 05 A 1920 7 TR Bottom View Side View 0.640.05 0.200.10 (0.0250.002) (0.0080.004) Type Size Design Frequency Finish Packaging (MHz) 7 = Au Tape & Reel 0.040.04 T = NiSn TR = 3 Kpcs 1.280.20 (0.0020.002) (0.0500.008) TR/500 = 500 pcs 0.250.10 0.950.05 (0.0100.004) QUALITY INSPECTION (0.0370.002) Finished parts are 100% tested for electrical parameters and visual characteristics. 0.550.10 0.200.10 (0.0220.004) (0.0080.004) 0.440.10 (0.0170.004) OPERATING TEMPERATURE 2.120.20 (0.0830.008) Unit: mm (inches) -40C to +85C TERMINATION Terminal No. Terminal Name Finishes available in Ni Au, Ni Sn and OSP coatings which are compatible 1 High Frequency Port with automatic soldering technologies which include reflow, wave soldering, 2 GND vapor phase and manual. 3 Low Frequency Port 4 GND ORIENTATION IN TAPE 5 Common Port Top View 6 GND 6 1 6 1 PART NUMBER: DP05A19207TR 5 2 5 2 Specification 25C Size mm(inches) 2.12 x 1.28 (0.083 x 0.050) 4 3 4 3 Height mm(inches) 0.55 (0.021) Volume (mm 3) 1.5 Frequency Range (F1) (MHz) 85935 Frequency Range (F2) (MHz) 192070 POWER CAPACITY Insertion Loss (F1, at Fc) (dB) -0.4 4.5W Maximum Insertion Loss (F2, at Fc) (dB) -0.6 Attenuation (F1) at (F2) (dB) -23 Attenuation (F2) at (F1) (dB) -23 VSWR (Input F1) 1.4 VSWR (Input F2) 1.3 VSWR (Lowband F1) 1.4 VSWR (Highband F2) 1.4 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 357 012419 Multilayer Organic (MLO ) Diplexers MLO Diplexers 0805 CDMA S PARAMETER MEASUREMENTS 0 0 -5 -5 High Band Low Band -10 -10 -15 -15 -20 -20 -25 Return Loss -25 -30 Return Loss -30 -35 -35 -40 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 freq, GHz freq, GHz -12 -14 -16 -18 -20 -22 -24 -26 Isolation -28 -30 -32 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 freq, GHz Note: Measurements were taken using an Anritsu 4 port VNA Diplexer was mounted on a custom evaluation board. To reduce systematic errors from the VNA, the coaxial measure- ment cables, and evaluation board, a Short-Open-Load-Thru (SOLT) calibration was performed, using a custom fabricated calibration substrate. This is the most common coaxial calibration methods. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 358 012419 dB(S(1,1) dB(S(3,1) dB(S(2,3)) dB(S(1,1) dB(S(2,1)