EVM-915-025-FCR Linx Technologies

EVM-915-025 Data Guide Warning: Linx radio frequency R) products may be used to Table of Contents control machinery or devices remotely, including machinery or devices that can cause death, bodily injuries, and/or property damage if 1 Description improperly or inadvertently triggered, particularly in industrial settings or 2 Ordering Information other applications implicating life-safety concerns. No Linx Technologies product is intended for use in any application without redundancies 2 Electrical Specifications where the safety of life or property is at risk. 3 Schematic Diagram 4 Pin Assignments The customers and users of devices and machinery controlled with RF products must understand and must use all appropriate safety 5 Pin Descriptions procedures in connection with the devices, including without limitation, 6 PCB Footprint using appropriate safety procedures to prevent inadvertent triggering by 6 PCB Footprint the user of the device and using appropriate security codes to prevent triggering of the remote controlled machine or device by users of other 6 Board Layout Guidelines remote controllers. 7 Helpful Application Notes from Linx 7 Power Supply Requirements Do not use this or any Linx product to trigger an action directly from the data line or RSSI lines without a protocol or encoder/ 8 Interference Considerations decoder to validate the data. Without validation, any signal from 9 Usage Guidelines for FCC Compliance another unrelated transmitter in the environment received by the module 9 Additional Testing Requirements could inadvertently trigger the action. 10 Module Modification All RF products are susceptible to RF interference that can prevent 10 Information to the User communication. RF products without frequency agility or hopping 11 Product Labeling implemented are more subject to interference. This module does have 11 Antenna Selection a frequency hopping protocol built in, but the developer should still be aware of the risk of interference. Do not use any Linx product over the limits in this data guide. Excessive voltage or extended operation at the maximum voltage could cause product failure. Exceeding the reflow temperature profile could cause product failure which is not immediately evident. Do not make any physical or electrical modifications to any Linx product. This will void the warranty and regulatory and UL certifications and may cause product failure which is not immediately evident.