EVM-915-DTS-FCS Linx Technologies

EVM-915-DTS Data Guide Warning: Linx radio frequency R) products may be used to Table of Contents control machinery or devices remotely, including machinery or devices that can cause death, bodily injuries, and/or property damage if 1 Description improperly or inadvertently triggered, particularly in industrial settings or 2 Ordering Information other applications implicating life-safety concerns. No Linx Technologies product is intended for use in any application without redundancies 2 Electrical Specifications where the safety of life or property is at risk. 3 Pin Assignments 3 Pin Descriptions The customers and users of devices and machinery controlled with RF products must understand and must use all appropriate safety 4 PCB Footprint procedures in connection with the devices, including without limitation, 4 Board Layout Guidelines using appropriate safety procedures to prevent inadvertent triggering by 5 Schematic Diagram the user of the device and using appropriate security codes to prevent triggering of the remote controlled machine or device by users of other 6 Usage Guidelines for Regulatory Compliance remote controllers. 6 Additional Testing Requirements 7 Module Modification Do not use this or any Linx product to trigger an action directly 7 Information to the user from the data line or RSSI lines without a protocol or encoder/ decoder to validate the data. Without validation, any signal from 8 Brazil Anatel Labeling Requirements another unrelated transmitter in the environment received by the 8 Product Labeling module could inadvertently trigger the action. 9 Antenna Selection All RF products are susceptible to RF interference that can prevent 10 Interference Considerations communication. RF products without frequency agility or hopping 11 Helpful Application Notes From Linx implemented are more subject to interference. This module does not 11 Power Supply Requirements have frequency agility built in. Do not use any Linx product over the limits in this data guide. Excessive voltage or extended operation at the maximum voltage could cause product failure. Exceeding the reflow temperature profile could cause product failure which is not immediately evident. Do not make any physical or electrical modifications to any Linx product. This will void the warranty and regulatory and UL certifications and may cause product failure which is not immediately evident.