MDEV-315-HH-LR8-MS Linx Technologies

MS Long-Range Handheld Transmitter Master Development System User's Guide Warning: Some customers may want Linx radio frequency (RF) ! Table of Contents products to control machinery or devices remotely, including machin- ery or devices that can cause death, bodily injuries, and/or property 1 Introduction damage if improperly or inadvertently triggered, particularly in industrial settings or other applications implicating life-safety concerns (Life and 2 Ordering Information Property Safety Situations). 2 MS Series Decoder Development Board NO OEM LINX REMOTE CONTROL OR FUNCTION MODULE 3 Using the Master Development System SHOULD EVER BE USED IN LIFE AND PROPERTY SAFETY 3 Troubleshooting SITUATIONS. No OEM Linx Remote Control or Function Module 4 Setting the Transmitter Address should be modified for Life and Property Safety Situations. Such modification cannot provide sufficient safety and will void the products 4 OTX-***-HH-LR8-MS Button Assignments regulatory certification and warranty. 5 Contention Considerations Customers may use our (non-Function) Modules, Antenna and Connec- 5 Battery Replacement tors as part of other systems in Life Safety Situations, but only with 5 Assembly Diagram necessary and industry appropriate redundancies and in compliance with applicable safety standards, including without limitation, ANSI and 6 The Decoder Board NFPA standards. It is solely the responsibility of any Linx customer 11 Installing the Software and Drivers who uses one or more of these products to incorporate appropriate 12 Master Development Software redundancies and safety standards for the Life and Property Safety Situation application. 15 Resources Do not use this or any Linx product to trigger an action directly from the data line or RSSI lines without a protocol or encoder/ decoder to validate the data. Without validation, any signal from another unrelated transmitter in the environment received by the module could inadvertently trigger the action. All RF products are susceptible to RF interference that can prevent communication. RF products without frequency agility or hopping implemented are more subject to interference. This module does not have a frequency hopping protocol built in. Do not use any Linx product over the limits in this data guide. Excessive voltage or extended operation at the maximum voltage could cause product failure. Exceeding the reflow temperature profile could cause product failure which is not immediately evident. Do not make any physical or electrical modifications to any Linx product. This will void the warranty and regulatory and UL certifications and may cause product failure which is not immediately evident.