MDEV-900-DT Linx Technologies

TM HumDT Series Master Development System User s Guide Warning: Some customers may want Linx radio frequency (RF) Table of Contents products to control machinery or devices remotely, including machinery or devices that can cause death, bodily injuries, and/or property 1 Introduction damage if improperly or inadvertently triggered, particularly in industrial settings or other applications implicating life-safety concerns (Life and 2 Ordering Information Property Safety Situations). TM 2 HumDT Series Transceiver Carrier Board TM NO OEM LINX REMOTE CONTROL OR FUNCTION MODULE 2 HumDT Series Transceiver Carrier Board Objects SHOULD EVER BE USED IN LIFE AND PROPERTY SAFETY TM 3 HumDT Series Carrier Board Pin Assignments SITUATIONS. No OEM Linx Remote Control or Function Module 3 Programming Dock should be modified for Life and Property Safety Situations. Such modification cannot provide sufficient safety and will void the products 3 Programming Dock Objects regulatory certification and warranty. 4 Prototype Board Customers may use our (non-Function) Modules, Antenna and 4 Prototype Board Objects Connectors as part of other systems in Life Safety Situations, but 5 Initial Setup only with necessary and industry appropriate redundancies and in compliance with applicable safety standards, including without 6 Using the Prototype Board limitation, ANSI and NFPA standards. It is solely the responsibility 8 Using the Programming Dock of any Linx customer who uses one or more of these products to 10 The Development Kit Demonstration Software incorporate appropriate redundancies and safety standards for the Life and Property Safety Situation application. 17 Development Kit Demonstration Software Example 22 Carrier Board Schematic Do not use this or any Linx product to trigger an action directly from the data line or RSSI lines without a protocol or encoder/ 23 Programming Dock Board Schematic decoder to validate the data. Without validation, any signal from 28 Prototype Board Schematic another unrelated transmitter in the environment received by the module could inadvertently trigger the action. 30 Notes All RF products are susceptible to RF interference that can prevent communication. RF products without frequency agility or hopping implemented are more subject to interference. This module does not have a frequency hopping protocol built in. Do not use any Linx product over the limits in this data guide. Excessive voltage or extended operation at the maximum voltage could cause product failure. Exceeding the reflow temperature profile could cause product failure which is not immediately evident. Do not make any physical or electrical modifications to any Linx product. This will void the warranty and regulatory and UL certifications and may cause product failure which is not immediately evident.