CA3010 MACOM

A3010 Cascadable Amplifier Rev. V4 10 kHz to 2500 MHz Features Product Image GAIN: 9.5 dB (TYP.) DC COUPLING REQUIRED* +/- 1 dB GAIN FLATNESS HIGH DRIVER OUTPUT LEVEL: +18 dBm INPUT/OUTPUT MATCH: < 2.0:1 (TYP.) Description The A3010 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage GaAs FET feedback amplifier design displays impressive performance characteristics over a broadband frequency range. An RF choke is used for DC power supply decoupling. A voltage sequencing circuit can be used to ensure the negative voltage (-5.2 Vdc) is turned on first and turned off last during normal operation. Reference the application circuit on page 2. The TO-8 package is hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number Package A3010 TO-8 CA3010 ** SMA Connectorized ** The connectorized version is not RoHs compliant. Electrical Specifications: Z = 50, V = +12 / -5.2 V 0 CC DC Absolute Maximum Ratings Absolute Typical Guaranteed Parameter Maximum Parameter Units 25C 0 to 50C -54 to +85C** Storage Temperature -62C to +125C Frequency MHz 0.010-2500 0.010-2500 0.010-2500 Case Temperature 125C Small Signal Gain (min) dB 9.5 8.5 8.0 DC Voltage +18 V Gain Flatness (max) dB 0.9 1.0 1.2 Continuous Input Power +17 dBm Short Term Input power Reverse Isolation dB 16 100 mW (1 minute max.) Noise Figure (max) dB 4.5 5.5 6.0 Peak Power (3 sec max.) 0.5 W Power Output dBm 19.0 17.0 16.5 S Series Burn-In 1 dB comp. (min) 125C Temperature (case) IP3 dBm +35 Thermal Data: V = +12/-5.2 V CC DC VSWR Input / Output (max) 2.0:1 / 2.0:1 2.2:1 / 2.2:1 2.3:1 / 2.3:1 Parameter Rating DC Voltage - Positive Volts +12 +12 +12 Thermal Resistance 105.6C/W jc DC Current - Positive (max) mA 155 160 165 Transistor Power Dissipation P 0.55 W d DC Voltage - Negative Volts -5.2 -5.2 -5.2 Junction Temperature Rise 58.1C DC Current - Negative (max) mA 15 20 25 Above Case T jc * Model A3010 requires external Input and output DC blocking capacitors (0.36 F nominal) on the circuit board transmission lines for operation. Model CA3010 has internal DC blocking capacitors integrated in the design, so external blocking capacitors are not required. o o ** Over temperature performance limits for part number CA3010, guaranteed from 0 C to +50 C only. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: A3010 Cascadable Amplifier Rev. V4 10 kHz to 2500 MHz * Typical Performance Curves at +25C Outline Drawing: TO-8 - DC Voltage + DC Voltage WEIGHT: 1 gram (0.04 oz.) max * Outline Drawing: SMA Connectorized + DC Voltage - DC Voltage WEIGHT: 19 grams (0.67 oz.) max Dimensions are inches (millimeters) 0.015 (0.38) unless otherwise specified. Application Sequencing Circuit Block Diagram 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: