CMM0511-QT Driver Amplifier, GaAs MMIC Rev. V1 5 - 14 GHz Features Block Diagram 20 dB Gain N/C N/C N/C VD 11 dBm P1dB 16 15 14 13 Single Bias 5 - 7 V, 90 mA Self Bias N/C N/C 1 12 Lead-Free 3 mm, 16-lead QFN On-Chip ESD Protection N/C 2 11 N/C RoHS* Compliant RF 10 RF IN 3 OUT Description N/C 4 9 N/C The CMM0511-QT is a 3 stage 5 to 14 GHz driver amplifier packaged in surface mount 3 mm 16-lead 5 6 7 8 QFN package. The device is a self-biased, single N/C N/C N/C N/C bias design with 20 dB gain and 11 dBm P1dB. This MMIC uses an optical pHEMT process. 2 Pin Configuration Pin Function Description 1 Ordering Information 1,2,4 - 9,11, N/C No Connection 12,14,15,16 Part Number Package 3 RF RF Input IN CMM0511-QT-0G0T 500 piece reel 10 RF RF Output OUT CMM0511-QT-0G00 Bulk 13 VD Drain Voltage 3 PB-CMM0511-QT-0000 Sample Board 17 GND Paddle 2. MACOM recommends connecting No Connection (N/C) 1. Reference Application Note M513 for reel size information. package pins to ground. 3. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. Electrical Specifications: Freq. = 5 - 14 GHz, T = +25C, Z = 50 A 0 Parameter Units Min. Typ. Max. Gain dB 20 Input Return Loss dB 12 Output P1dB dBm 11 Output IP3 dBm 22 Bias Voltage V 5 7 Current mA 90 120 * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: CMM0511-QT Driver Amplifier, GaAs MMIC Rev. V1 5 - 14 GHz Typical Parameters: 6 V, 90 mA Frequency (GHz) Parameter Units 5 7 9 11 13 14 Gain dB 20.5 20.5 18.5 18.5 18.5 20.0 Input Return Loss dB 15.0 15.0 17.0 20.0 10.0 8.0 Output Return Loss dB 14.5 15.0 11.0 11.0 9.0 9.0 Output P1dB dBm 13.0 13.0 10.0 10.0 10.0 11.5 Output IP3 dBm 24.0 24.0 22.0 20.0 21.0 20.5 4,5 Handling Procedures Absolute Maximum Ratings Please observe the following precautions to avoid Parameter Absolute Maximum damage: Input Power 10 dBm Static Sensitivity Bias Voltage 8 V These electronic devices are sensitive to Junction Temperature +175C electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques Operating Temperature -40C to +85C should be used when handling these devices. Storage Temperature -55C to +125C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. Evaluation Board Schematic Evaluation Board Layout 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: