E-Series Surface Mount Mixer 2 - 500 MHz ELCM-1MH ELCM-1MH E-Series Surface Mount Mixer 2 500 MHz Features SM-89 Package LO Power +13 dBm Note: Non Hermetic Package Up to +9 dBm RF Surface Mount Low Profile Description M/A-COMs ELCM-1MH is a Low Cost,Broadband,high Performance Double Balanced Mixer designed for use in high volume wireless applications. The device has been optimised by careful selection of the Schottky Diode and Balun Transformer for excellent performance. ELCM-1MH is available in an SM-89 surface mount package and reflows using standard soldering reflow profiles. Electrical Specifications +25C, Z = 50 Ohms, LO = +7dBm 0 Parameter Units Minimum Typical Maximum Frequency Range RF 2 - 500 MHz LO 2 - 500 MHz IF DC - 500 MHz Conversion Loss 2 - 250 dB 5.5 7.0 250 - 500 dB 6.0 8.0 Isolation (LO - RF) 2 - 20 MHz 45 55 20 - 250 MHz 30 44 250 - 500 MHz 25 30 Isolation (LO - IF) 2 - 20 MHz 40 55 20 - 250 MHz 25 35 250 - 500 MHz 25 29 V1.00 S 1456 B ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, India Tel: +91.80.4155721 China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are information. typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make E-Series Surface Mount Mixer 2 - 500 MHz ELCM-1MH Functional Configuration Absolute Maximum Ratings Parameter Absolute Maximum Function Pin No. RF Power 50 mW LO 1 Peak IF Current 40 mA RF 4 Storage Temperature -55C to +100C IF 5 Operating Temperature -55C to +100C Ground 2, 3, 6 Pin Temperature (10 Seconds) 260C Case Ground Unconnected Typical Performance +25C L-R Isolation Conversion Loss -4.0 0.0 -10.0 -5.0 -20.0 -6.0 -30.0 -40.0 -7.0 -50.0 -8.0 -60.0 -70.0 -9.0 1 101 201 300 400 500 10 108 206 304 402 500 Frequency (MHz) Frequency (MHz) L-I Isolation 0.0 -10.0 -20.0 -30.0 -40.0 -50.0 -60.0 -70.0 1 101 201 300 400 500 Frequency (MHz) NOTES: 1. See M/A Com Soldering Reflow Guidelines AN-002. 2. Part constructed using a High Melting Point Solder (95.5Pb/3.5Sn/1.5Ag). 3. Qualified for application and reliability per industry standards including Reflow Simulation, Temperature Cycle, High Temperature life and Temperature/Humidity. 4. This part has an Average Outgoing Quality Level of 4.5 Sigma. V1.00 S 1456 B ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, India Tel: +91.80.4155721 China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are information. typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make dB dB dB