MAAL-009053-001SMB MACOM

MAAL-009053 Satellite TV Amplifier Rev. V9 800 - 3000 MHz Features Functional Schematic 1.4 dB Noise Figure 35 dBm Output IP 3 RF / OUT Single +3 V Bias Pin 1 6 GND V DD Lead-Free SC70 6-Lead (SOT-363) Package Halogen-Free Green Mold Compound Paddle RoHS* Compliant 5 GND 2 GND Description The MAAL-009053 broadband gain block is a GaAs RF 3 4 N/C IN MMIC amplifier in a lead-free SC70-6LD (SOT-363) surface mount plastic package. The topology is a monolithic single stage self-biased design featuring a convenient 50 input / output impedance that minimizes the number of external components. 2 Pin Configuration The MAAL-009053 is fabricated using a pHEMT Pin No. Function Description process to help realize the complementary high IP3 and low NF. This process features full passivation 1 GND Ground for performance and reliability. 2 GND Ground 3 RF RF Input IN 4 N/C No Connection 1 Ordering Information 5 GND Ground Part Number Package 3 6 RF /V RF Output / Drain Voltage OUT DD MAAL-009053-000000 Bulk Packaging 2. MACOM recommends connecting unused package pins to ground. 3. Series inductor and decoupling capacitor recommended on MAAL-009053-TR3000 3000 piece reel pin 6. 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAL-009053 Satellite TV Amplifier Rev. V9 800 - 3000 MHz Electrical Specifications: T = +25C, V = +3 V, Z = 50 A DD 0 Bias Voltage 8 Parameter Test Conditions Units 3 Volts 5 Volts Min. Typ. Max. Typ. 0.9 GHz 14.0 14.5 Gain dB 1.9 GHz 10.4 11.0 13.0 11.2 0.9 GHz 1.4 1.5 Noise Figure dB 1.9 GHz 1.4 1.8 1.5 0.9 GHz 7 7 Input Return Loss dB 1.9 GHz 11 11 0.9 GHz 22 26.0 Output Return Loss dB 1.9 GHz 20 18.5 Output P1dB 900 - 1900 MHz dBm 18.5 Output IP 900 - 1900 MHz dBm 35 35 3 Current mA 60 80 100 95 4,5 Absolute Maximum Ratings Handling Procedures Please observe the following precautions to avoid Parameter Absolute Maximum damage: Gain Compression 6 dB Static Sensitivity Voltage 5.5 V These electronic devices are sensitive to 6,7 electrostatic discharge (ESD) and can be damaged Junction Temperature +150C by static electricity. Proper ESD control techniques should be used when handling these HBM class 1A Operating Temperature -40C to +85C devices. Storage Temperature -65C to +150C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 6. Operating at nominal conditions with T 150C will ensure J MTTF > 1 x 106 hours. 7. Junction Temperature (T ) = Case Temperature (T ) + *V*I) J C JC Typical thermal resistance ( ) = 131C/W JC a) For T = +25C, C T = 56C 3 V, 80 mA J b) For T = +85C, C T = 116C 3 V, 80 mA J 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: