MAAL-009120-001SMB MACOM

MAAL-009120 Miniature Broadband Gain Stage Rev. V1 70 - 3000 MHz Features Functional Block Diagram Low Noise Figure High IP 3 Pin 1 6 RF OUT/ Single Supply +3 V, +5 V GND V DD RoHS* Compliant SC70- 6LD Package Paddle Description GND GND M/A-COM Technologys MAAL-009120 broadband gain stage is a GaAs MMIC amplifier in a lead-free SC70-6LD (SOT-363) surface mount plastic package. The MAAL-009120 employs a monolithic 1 RF IN GND -stage self-biased design featuring a convenient 50 input/output impedance that minimizes the number of external components required. Its broadband design provides usable performance from 500 to 3000 MHz. For operation below 500 MHz contact M/A-COM Pin Configuration Techs application group for support. PIN Function Description 1 GND Ground 2 GND Ground 1,2 Ordering Information 3 RF In RF input Part Number Package 4 GND Ground MAAL-009120 -TR1000 1000 piece reel 5 GND Ground 6 RF Out/V RF output & drain voltage input DD MAAL-009120 -TR3000 3000 piece reel MAAL-009120 -001SMB Sample Test Board 3,4,5 Absolute Maximum Ratings 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. Parameter Absolute Maximum Gain Compression 6 dB Voltage 5.5 volts Operating Temperature -40 C to +85 C Storage Temperature -65 C to +150 C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM Technology does not recommend sustained operation near these survivability limits. 5. Operating at 5 volts with no drain resistor will require the RF output power to be no greater than 10 dBm. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAL-009120 Miniature Broadband Gain Stage Rev. V1 70 - 3000 MHz Electrical Specifications: Freq. = 500 - 3000 MHz, T = 25C, Z = 50 A 0 Bias Voltage 5 3 Volts 5 Volts Parameter Test Conditions Units Min. Typ. Max. Typ. F = 0.9 GHz 14 14.5 Gain F = 1.9 GHz dB 10.4 11 13.0 11.2 F = 3.0 GHz 8 8.5 F = 0.9 GHz 1.4 1.5 Noise Figure F = 1.9 GHz dB 1.4 1.8 1.5 F = 3.0 GHz 1.5 1.6 F = 0.9 GHz 7 7 Input Return Loss F = 1.9 GHz dB 11 11.0 F = 3.0 GHz 11 10.5 F = 0.9 GHz 22 26 Output Return Loss F = 1.9 GHz dB 20 18.5 F = 3.0 GHz 15.5 17 Output P1dB 500 3000 MHz dBm 18.5 Output IP 500 3000 MHz dBm 35 35 3 Current mA 60 80 100 95 Baseline Application Schematic 3V, 5V Component List 3V, 5V Part Value Case Style Purpose C3 V DD C1 39 pF 0402 Input DC Block L1 C2 39 pF 0402 Output DC Block C1 C3 470 pF 0402 RF Bypass RF IN RF OUT C2 L1 12 nH 0805 RF Choke/Tuning Recommended PCB Configuration 3V, 5V Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be dam- aged by static electricity. Proper ESD control techniques should be used when handling these devices. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: