MAAL-010200-001SMB MACOM

MAAL-010200 Miniature Broadband Gain Stage Rev. V1 70 - 3000 MHz Features Functional Block Diagram Low Noise Figure High IP 3 6 Single Supply +3 V, +5 V RoHS* Compliant SOT-89 Package Description M/A-COM Technologys MAAL-010200 broadband gain stage is a GaAs MMIC amplifier in a lead-free SOT-89 surface mount plastic package. The MAAL- 010200 employs a monolithic 1-stage self-biased design featuring a convenient 50 input/output Pin 1 impedance that minimizes the number of external RF Out/V components required. Its broadband design provides RF In DD usable performance from 500 to 3000 MHz. For operation below 500 MHz contact M/A-COM Technologys application group for support. Pin Configuration Pin Pin Name Description 1 RF In RF Input 2 GND Ground 1,2 Ordering Information 3 RF Out/V RF Output & Voltage Bias DD Part Number Package 3,4,5 Absolute Maximum Ratings MAAL-010200 -TR3000 3000 piece reel Parameter Absolute Maximum MAAL-010200-001SMB Sample Test Board Gain Compression 6 dB 1. Reference Application Note M513 for reel size information. Voltage 5.5 volts 2. All sample boards include 5 loose parts. Operating Temperature -40 C to +85 C Storage Temperature -65 C to +150 C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM Technology does not recommend sustained operation near these survivability limits. 5. Operating at 5 volts with no drain resistor will require the RF output power to be no greater than 10 dBm. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAL-010200 Miniature Broadband Gain Stage Rev. V1 70 - 3000 MHz Electrical Specifications: Freq. = 500 - 3000 MHz, T = 25C, Z = 50 A 0 Bias Voltage 6 Parameter Test Conditions Units 3 Volts 5 Volts Min. Typ. Max. Typ. F = 0.9 GHz 14 14 Gain F = 1.9 GHz dB 10 11 13 11 F = 3.0 GHz 8 8.5 F = 0.9 GHz 1.3 1.45 Noise Figure F = 1.9 GHz dB 1.4 2 1.4 F = 3.0 GHz 1.45 1.5 F = 0.9 GHz 7.5 7.5 Input Return Loss F = 1.9 GHz dB 11 11 F = 3.0 GHz 14 14 F = 0.9 GHz 19.5 20 Output Return Loss F = 1.9 GHz dB 22 21.5 F = 3.0 GHz 20 23 Output P1dB 500 3000 MHz dBm 17.5 Output IP 500 3000 MHz dBm 36 36 3 Current mA 50 77 100 90 Baseline Application Schematic 3V, 5V Component List 3V, 5V C3 Part Value Case Style Purpose V DD C1,C2 39 pF 0402 DC Block L1 C1 C3 0.1 F 0402 RF Bypass RF IN RF OUT C2 L1 12 nH 0402 RF Choke/Tuning Recommended PCB Configuration 3V, 5V Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be dam- aged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: