MAAL-010706-001SMB MACOM

MAAL-010706 Low Noise Amplifier Rev. V3 1.4-4.0 GHz Features Functional Block Diagram Low Noise Figure Excellent Input Return Loss Single Voltage Bias 3 V N/C 1 8 N/C Integrated Active Bias Circuit Current Adjustable 20-80 mA with an RF RF External Resistor IN OUT High Linearity, OIP3 > 34 dBm Small Package: 2 mm PDFN-8LD RF GND N/C RoHS* Compliant and 260C Reflow Compatible BIAS FB V BIAS Description The MAAL-010706 is a high dynamic range single stage MMIC LNA with excellent linearity and low noise figure designed for operation from 1.4 to 4.0 Pin Configuration GHz. The LNA is packaged in an RoHS compliant leadless 2 mm 8-lead PDFN package. Pin No. Pin Name Description 1 N/C No Connection This MMIC has an integrated active bias circuit allowing direct connection to +3 V voltage supply 2 RF RF Input IN and minimizing variation over temperature and process. The bias current and gain can be set with 3 RF GND RF Ground external resistors to allow the user to customize the 4 V Bias Voltage current and gain value to fit the application. BIAS 5 FB Feedback The MAAL-010706 offers less than 0.7 dB noise figure, more than 34 dBm OIP3 and 20 dB input 6 N/C No Connection return loss. The excellent input match, low noise 7 RF RF Output figure and high OIP3 along with the flexibility of OUT setting current and gain make this LNA ideal for 3G 8 N/C No Connection and 4G cellular infrastructure applications. 1,2 For optimum performance below 1.4 GHz the MAAL Ordering Information -010705 is recommended. The MAAL-010706 and Part Number Package MAAL-010705 share the package type and footprint. MAAL-010706-TR3000 tape and reel MAAL-010706-001SMB evaluation board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAL-010706 Low Noise Amplifier Rev. V3 1.4-4.0 GHz 3 Electrical Specifications : Freq = 1.85 GHz, Vd = 4 V, 25C, Z = 50 0 Parameter Test Conditions Units Min. Typ. Max. Gain - dB 16.0 17.5 - Output IP3 Pout=5 dBm, Tone Spacing=1 MHz dBm - 34.5 - Output P1dB - dBm 17.5 19 - Input Return Loss - dB - 21 - Output Return Loss - dB - 15 - Noise Figure - dB - 0.60 - Total Current IDQ=Id+IBias mA - 60 70 3. Vd and Vbias are connected together to +4 V, R3 = 300 ohms and R4 = 240 ohms, reference recommended schematic on page 8. 4,5 Absolute Maximum Ratings Parameter Absolute Max. Handling Procedures Supply Voltage +5.5 V Please observe the following precautions to avoid damage: Current 100 mA Power Dissipation 600 mW Static Sensitivity RF Input Power 20 dBm Gallium Arsenide Integrated Circuits are sensitive Storage Temperature -55 to +150 C to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control Operating Temperature -40 to +85 C techniques should be used when handling these 6 Junction Temperature +150 C class 1A devices. 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. 6. Typical thermal resistance ( jc) = 45 C/W. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: