MAAL-011078 Low Noise Amplifier Rev. V4 700 MHz - 6 GHz Features Functional Block Diagram Low Noise Figure: 0.35 dB 1.9 GHz 0.50 dB 2.6 GHz High Gain: 1 N/C 8 N/C 22 dB 2.6 GHz 15 dB 6.0 GHz RF / OUT RF 2 7 IN High Linearity: 33 dBm OIP3 V DD Single Voltage Bias: 3 - 5 V BIAS N/C 3 6 N/C Integrated Active Bias Circuit Current Adjustable 30 - 80 mA V N/C 4 5 BIAS Lead-Free 2 mm 8-LD PDFN Package Halogen-Free Green Mold Compound RoHS* Compliant and 260C Reflow Compatible 3 Description Pin Configuration The MAAL-011078 is a high dynamic range, single Pin Pin Name Description stage MMIC LNA with ultra low noise figure, high gain and excellent linearity. This amplifier is 1, 3, 4, 6, 8 N/C No Connection designed for operation from 700 MHz to 6 GHz and is housed in a lead-free 2 mm 8-lead PDFN plastic 2 RF RF Input IN package. 5 V Bias Voltage BIAS This low noise amplifier has an integrated active bias circuit allowing direct connection to 3 V or 5 V 7 RF / V RF Output / Drain Voltage OUT DD bias and minimizing variations over temperature and 4 9 Pad Ground process. The bias current is set by an external resistor, so the user can customize the power 3. MACOM recommends connecting unused package pins to consumption to fit the application. V can be BIAS ground. utilized as an enable pin to power the device up and 4. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. down during operation. In the 50 environment and at 3 V, the MAAL-011078 offers 0.5 dB noise figure at 2.6 GHz, 1,2 Ordering Information with 22 dB of gain and over 33 dBm output third order intercept point (OIP3). It is ideal for 5G & 4G Part Number Package cellular infrastructure and Wi-Fi applications. MAAL-011078-TR1000 1000 piece reel MAAL-011078-TR3000 3000 piece reel Sample Board MAAL-011078-001SMB 2.3 - 2.7 GHz 1. Reference Application Note M513 for reel size information. 2. All sample boards include 3 loose parts. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAL-011078 Low Noise Amplifier Rev. V4 700 MHz - 6 GHz 5 Electrical Specifications: Freq = 1.9 GHz, V = 3 V, +25C, Z = 50 , V = 2.3 V DD 0 BIAS Parameter Test Conditions Units Min. Typ. Max. Noise Figure - dB 0.35 0.7 Gain - dB 21 23 25 6 Input Return Loss - dB 5 6 Output Return Loss - dB 5 Output IP3 P = -22 dBm, tones 11 MHz apart dBm 33 IN Output P1dB - dBm 17.5 Total Current I = I + I mA 39 50 68 DQ DD BIAS 5. Refer to biasing options on page 3. 6. Return Loss can be improved with external matching components. Refer to application section. 7,8,9 Absolute Maximum Ratings Handling Procedures Please observe the following precautions to avoid Parameter Absolute Maximum damage: RF Input Power CW 19 dBm Static Sensitivity V 6 V DD Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged V 5 V BIAS by static electricity. Proper ESD control techniques Storage Temperature -55C to +150C should be used when handling these devices. Operating Temperature -40C to +85C 10 Junction Temperature +150C 7. Exceeding any one or combination of these limits may cause permanent damage to this device. 8. MACOM does not recommend sustained operation near these survivability limits. 9. Operating at nominal conditions with T 150C will ensure J 6 MTTF > 1 x 10 hours. 10.Junction Temperature (T ) = T + * ((V * I) - (P - P )) J C JC OUT IN Typical thermal resistance ( ) = 83C/W JC a) For T = +25C, C T = 33C 3 V, 0.05 A, P = 17.5 dBm, P = -4.5 dBm J OUT IN b) For T = +85C, C T = 93C 3 V, 0.05 A, P = 17.5 dBm, P = -4.5 dBm J OUT IN 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: