MAAM-007807 Broadband CATV Amplifier Rev. V2 50 - 1000 MHz Features Functional Schematic 75 Input / Output Match GND 3.8 dB Noise Figure 9 dB Gain Lead-Free SOT-89 Package Halogen-Free Green Mold Compound RoHS* Compliant and 260C Reflow Compatible Description M/A-COMs MAAM-007807 CATV amplifier is a GaAs MMIC which exhibits low distortion in a miniature lead-free surface mount package. The Pin 1 MAAM-007807 employs a monolithic single stage design featuring a convenient 75 input/output impedance that minimizes the number of external RF RF IN GND OUT components required. The MAAM-007807 provides low noise and high Pin Configuration linearity. It is ideally suited for set top boxes, home gateways and other broadband internet based Pin No. Pin Name Description appliances. 1 RF RF Input IN The MAAM-007807 is fabricated using M/A-COMs 2 GND Ground pHEMT process to realize low noise and low distortion. The process features full passivation for 3 RF RF Output / Drain Supply OUT robust performance and reliability. 3,4,5 Absolute Maximum Ratings 1,2 Ordering Information Parameter Absolute Maximum Part Number Package RF Input Power 8 dBm MAAM-007807-TR1000 1000 piece reel Voltage 8.0 volts Operating Temperature -40C to +85C MAAM-007807-TR3000 3000 piece reel 6 Junction Temperature +150C MAAM-007807-000SMB Sample Test Board Storage Temperature -65C to +150C 1. Reference Application Note M513 for reel size information. 3. Exceeding any one or combination of these limits may cause 2. All sample boards include 5 loose parts. permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 6 5. These operating conditions will ensure MTTF > 1 x 10 hours. 6. Junction Temperature (T ) = T + jc * (V * I) J C Typical thermal resistance ( jc) = 86 C/W. a) For T = 25C, C T = 51C 5 V, 60 mA J b) For T = 85C, C T = 109C 5 V, 55 mA J * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAM-007807 Broadband CATV Amplifier Rev. V2 50 - 1000 MHz Electrical Specifications: T = 25C, Freq: 50 - 1000 MHz, V = 5 Volts, Z = 75 A DD 0 Parameter Test Conditions Units Min. Typ. Max. Gain dB 8 9 10 Gain Flatness dB 0.4 0.8 Noise Figure dB 3.8 4.8 Input Return Loss dB 18 Output Return Loss dB 18 Output IP3 6 MHz Spacing, +4 dBm output per tone dBm 35 Composite Triple Beat, CTB 132 channels, +15 dBmV / channel at the input. dBc -75 Composite Second Order, CSO 132 channels, +15 dBmV / channel at the input. dBc -65 P1dB dBm 17 I 5 Volts mA 50 60 70 DD Recommended Board Layout Off-Chip Component Values Component Value Package C1 - C4 0.01 F 0402 C5 0.8 pF 0402 C3 GND 7 L1 1 H 1210 L2 3.3 nH 0402 L1 L3 6.8 nH 0402 R1 300 0402 L3 C1 7. L1 supplied from EPCOS, part number B82422A1102K100 C2 L2 C5 C4 R1 Handling Procedures Please observe the following precautions to avoid damage: Schematic Including Off-Chip Components Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by electricity. Proper ESD control techniques should be used when handling these devices. Pin 1 L3 L2 RF RF IN OUT C1 C2 C4 L1 C5 R1 V DD C3 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: