MAAM-007987-000CG2 MACOM

G2 / SMG2 Voltage Controlled Attenuator Module Rev. V4 5 - 2000 MHz Features Product Image Available in Surface Mount Low VSWR: <1.5:0 Low Insertion Loss: 2.3 dB 1000 MHz Low Distortion: >75 dB 15 V RoHS* Compliant Description The G2 / SMG2 attenuator is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. The design used 3 pin diodes to provide a non linear attenuation response across a broadband frequency range. Both TO-8 and surface mount packages are hermetically sealed. MIL-STD-883 environmental screening is available. 1 Electrical Specifications : V = 15 V, Z = 50 CC 0 Typical Guaranteed Parameter Units +25C 0 to +50C -54 to +85C Frequency MHz 5 - 2200 5 - 2000 5 - 2000 Maximum Attenuation (min.) 34 31 30 5 - 500 MHz dB 28 25 24 500 - 1000 MHz 22 20 18 1000 - 2000 MHz Insertion Loss (V = 15 V) (max.) CTRL 2.3 3.0 3.5 5 - 1000 MHz dB 2.8 3.5 4.0 1000 - 2000 MHz VSWR (worst case in attenuation range) dB <1.5:0 2.2:1 2.3:1 5 - 2000 MHz Flatness over Frequency (max.) dB 0.4 0.8 1.0 (Attenuation = min. to 15 dB, 5 - 2000 MHz) Switching Speed (max.) 25 10% - 90 % s 70 0% - 100 % Bias Voltage V 5 5 5 Control Voltage V 0 - 15 0 - 15 0 - 15 Bias Current (max.) mA 5.0 6.5 7.0 Control Current (max.) mA 4 6 7 1. Over temperature performance limits for part MAAM-007987-000CG2 are guaranteed from 0C to +50C only. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: G2 / SMG2 Voltage Controlled Attenuator Module Rev. V4 5 - 2000 MHz 2,3 Ordering Information Absolute Maximum Rantings Parameter Absolute Maximum Part Number Package Short Term RF Input Power 200 mW G2 TO-8 (1 minute max.) Peak Power (3 s max.) 1 W SMG2 Surface Mount 1 DC Voltage 18 V MAAM-007987-000CG2 SMA Connectorized DC Bias Voltage 10 V 1. The Connectorized version is not RoHS compliant. S Series Burn-In +125C Temperature Handling Procedures Case Temperature +125C Please observe the following precautions to avoid Storage Temperature -62C to +125C damage: 2. Exceeding any one or combination of these limits may cause Static Sensitivity permanent damage to this device. 3. MACOM does not recommend sustained operation near these These electronic devices are sensitive to survivability limits. electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Typical Performance Curves Attenuation vs. Control Voltage Attenuation vs. Control Voltage vs. Frequency 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: