MAAM-008821-TR3000 MACOM

MAAM-008821 Broadband CATV Single Ended 5-Way Active Splitter Rev. V1 50 - 1100 MHz Features Functional Schematic 5-Way Splitter Single Ended Input and Outputs 3.5 dB Gain +15 dBmV /Channel Input 3.8 dB Noise Figure Single +5 Volt Supply Lead-Free 3 mm 12-Lead PQFN Package Halogen-Free Green Mold Compound RoHS* Compliant and 260C Reflow Compatible Description The MAAM-008821 CATV 5-way active splitter is a GaAs MMIC which exhibits low noise figure and distortion in a lead-free 3mm 12-lead PQFN plastic package. The design features 75 inputs and outputs. Pin Configuration The MAAM-008821 is ideally suited for multi-tuner Pin No. Pin Name Description set top boxes, home gateways, and other broadband 1 FB Feedback/Bias internet based appliances. 2 IN RF Input The MAAM-008821 is fabricated using M/A-COM 3 N/C No Connection Technologys pHEMT process to realize low noise 4 OUT5 RF Output 5 and low distortion. The process features full 5 N/C No Connection passivation for robust performance and reliability. 6 OUT4 RF Output 4 7 N/C No Connection 1,2 8 OUT3 RF Output 3 Ordering Information 9 N/C No Connection Part Number Package 10 OUT2 RF Output 2 MAAM-008821-TR1000 1000 piece reel 11 N/C No Connection MAAM-008821-TR3000 3000 piece reel 12 OUT1 RF Output 1 3 MAAM-008821-001SMB Sample Test Board 13 Paddle RF and DC Ground 1. Reference Application Note M513 for reel size information. 3. The exposed pad centered on the package bottom must be 2. All sample boards include 5 loose parts. connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAM-008821 Broadband CATV Single Ended 5-Way Active Splitter Rev. V1 50 - 1100 MHz Electrical Specifications: Freq. 50 - 1000 MHz, T = 25C, V = +5 Volts, Z = 75 A DD 0 Parameter Test Conditions Units Min. Typ. Max. Gain IN to All Outputs dB 2 3.5 4 Gain Flatness IN to All Outputs dB - 1.0 1.2 Noise Figure IN to All Outputs dB - 3.8 - Input Return Loss IN dB - 15 - Output Return Loss All Outputs dB - 12 - Composite Triple Beat, CTB 132 channels, +15 dBmV/channel at the input dBc - -70 - Composite Second Order, CSO 132 channels, +15 dBmV/channel at the input dBc - -60 - Reverse Isolation All Outputs to IN dB - 30 - Output to Output Isolation Isolation between all RF outputs dB - 20 - Output Power at 1dB Compression, P1dB IN to All Outputs dB - 9 - Output 3rd Order Intercept Point, OIP3 500 MHz, 2-tone, 6 MHz spacing, -15 dBm Pout dBm - 24 - Output 2nd Order Intercept Point, OIP2 500 MHz, 2-tone, 6 MHz spacing, -15 dBm Pout dBm - 48 - I V = +5 Volts mA - 120 150 DD DD 4,5,6 Absolute Maximum Ratings Handling Procedures Please observe the following precautions to avoid Parameter Absolute Maximum damage: Max Input Power +12 dBm Static Sensitivity Vbias +10.0 V Gallium Arsenide Integrated Circuits are sensitive Operating Temperature -20C to +85C to electrostatic discharge (ESD) and can be 7 Junction Temperature 150C damaged by static electricity. Proper ESD control techniques should be used when handling these Storage Temperature -65C to +150C devices. An external protection circuit using an 4. Exceeding any one or combination of these limits may cause inexpensive anti-parallel diode pair can be used to permanent damage to this device. protect the IC. 5. M/A-COM Technology does not recommend sustained Please reference application note AN3028 on operation near these survivability limits. 6 6. These operating conditions will ensure MTTF > 1 x 10 hours.