MAAM-009320 Variable Gain Amplifier with Analog Control Rev. V1 400 - 2700 MHz Features Functional Schematic Wide Frequency Range +42 dBm Output IP3 25.5 dB Gain at 2140 MHz 26.5 dB Attenuation Range 24 19 Lead-Free 4 mm, 24-Lead PQFN Package RoHS* Compliant and 260C Reflow Compatible V 18 N/C CNTRL 11 +3 V N/C Description +5V N/C The MAAM-009320 is a variable gain amplifier with 26.5 dB of gain control at 2.14 GHz. It has good N/C N/C input IP3 performance over the full attenuation RF RF /+5 range. External matching components are used to IN OUT set the center frequency and achieve the return loss 6 N/C 13 N/C performance. The analog control is accomplished 12 through a single control pin of 0 to +3V. 7 The 4 mm PQFN package is RoHS compliant and o compatible with reflow temperatures to 260 C. Applications include transceivers for cellular 3 infrastructure. Pin Configuration Pin No. Function Pin No. Function 1 V 13 N/C CNTRL 1,2 2 +3V 14 RF /+5V Ordering Information OUT 3 +5V 15 N/C Part Number Package 4 N/C 16 N/C MAAM-009320-TR3000 3000 piece reel 5 RF 17 N/C IN 6 N/C 18 N/C MAAM-009320-001SMB Sample Board, 2140 MHz 7 N/C 19 N/C 1. Reference Application Note M513 for reel size information. 8 N/C 20 Interstage 2. All sample boards include 5 loose parts. 9 N/C 21 N/C 10 N/C 22 Interstage 11 N/C 23 N/C 12 N/C 24 N/C 4 25 Paddle 3. For optimum RF performance, all N/Cs should be terminated to ground. 4. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAM-009320 Variable Gain Amplifier with Analog Control Rev. V1 400 - 2700 MHz 5,6,7 Electrical Specifications : Freq. = 2140 MHz, T = +25C, Z = 50 A 0 Parameter Units Min. Typ. Max. Gain dB 24 25.5 Noise Figure dB 3.0 Input Return Loss dB 13 Output Return Loss dB 12 Output P1dB dBm 28 Output IP3 dBm 40 42 Pout = +9 dBm per tone SCL, 1 MHz spacing Attenuation Range dB 25 26.5 Attenuation Control V 0 to 3 Small Signal Current mA 231 300 5. Contact M/A-COM Technology Solutions Application Engineering Department for performance and tuning at other frequencies within frequency range. 6. Typical performance at no attenuation, Vcntrl = 0V. 7. Typical small signal currents are 76 mA for stage 1 and 155 mA for stage 3. 8,9 Absolute Maximum Ratings Handling Procedures Please observe the following precautions to avoid Parameter Absolute Maximum damage: Input Power +6 dBm Static Sensitivity Voltage (all DC pins) 6 volts Gallium Arsenide Integrated Circuits are sensitive Storage Temperature -55C to +150C to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control Case Temperature -40C to +85C techniques should be used when handling these 10,11 Junction Temp, Stage 1 150C class 1A devices. 10,12 Junction Temp, Stage 3 160C 8. Exceeding any one or combination of these limits may cause permanent damage to this device. 9. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. 10.Junction Temperature (T ) = T + jc * ((V * I) - (P - P )) J A OUT IN 11.Stage 1 typical thermal resistance ( jc) = 106.5 C/W 12.Stage 3 typical thermal resistance ( jc) = 68.6 C/W 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: