RF Driver Amplifier 250 - 4000 MHz MAAM-009560 Rev. V2 Features Functional Schematic Output Intercept Point of +42 dBm over a 20 dB Input Power Range Broadband Operation Lead-Free SOT-89 Package RoHS* Compliant Class 2 ESD Rating Applications ISM Wireless Networking & Communication 1 3 Description The MAAM-009560 RF driver amplifier is a GaAs RF RF / Bias IN OUT MMIC which exhibits exceptional linearity performance over a >20 dB dynamic range, as well as featuring high gain in a lead-free miniature SOT-89 surface mount plastic package. The device Pin Configuration is biased with a single +5 volt supply and consumes 225 mA typically. The MAAM-009560 is fabricated using an HBT 1 RF Input process to realize low current and high linearity. The process features full passivation for increased 2 Ground performance and reliability. 3 RF Output/Bias 1,2 Ordering Information MAAM-009560-000000 Bulk Packaging MAAM-009560-TR1000 1000 piece reel MAAM-009560-TR3000 3000 piece reel MAAM-009560-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: RF Driver Amplifier 250 - 4000 MHz MAAM-009560 Rev. V2 Electrical Specifications: Freq. = 2140 MHz, T = 25C, V = +5 V, Z = 50 A CC 0 Gain dB 14 15 Noise Figure dB 3 Input Return Loss dB 15 Output Return Loss dB 17 Output P1dB dBm 28.5 Output IP3 dBm 40 42 Quiescent Current mA 220 Current (P = 0 dBm) mA 225 325 IN 3 5,6 Maximum Operating Conditions Absolute Maximum Ratings 4 RF Output Power 29 dBm Junction Temperature 170 C Voltage 6 volts RF Output Power 28 dBm Storage Temperature -65 C to +150 C Operating Temperature -40 C to +85 C 6 3. These operating conditions will ensure MTTF > 1 x 10 hours. Junction Temperature 210 C 4. Junction Temperature (T ) = T + jc * ((V * I) - (P - P )) J A OUT IN 5. Exceeding any one or combination of these limits may cause Typical thermal resistance ( jc) = 47 C/W permanent damage to this device. a) For T = 25C, A 6. MACOM does not recommend sustained operation near these T = 73 C 5 V, 225 mA, P = 20 dBm, P = 5.0 dBm J OUT IN survivability limits. b) For T = 85C, A T = 123 C 5 V, 180 mA, P = 20 dBm, P = 5.5 dBm J OUT IN 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: