MAAM-009811 Broadband CATV Single Ended 2-Way Active Splitter Rev. V1 50 - 1100 MHz Features Functional Schematic 2-Way Splitter Single Ended Input and Outputs Single +3.3 Volt Supply 2.8 dB Gain +15 dBmV /Channel Input 4.5 dB Noise Figure Lead-Free 2 mm 8-Lead PDFN Package Halogen-Free Green Mold Compound RoHS* Compliant and 260C Reflow Compatible Description The MAAM-009811 CATV 2-way active splitter is a GaAs MMIC which exhibits low noise figure and distortion in a lead-free 2mm 8-lead PDFN plastic package. The design features 75 inputs and outputs. The MAAM-009811 is ideally suited for multi-tuner set top boxes, home gateways, and other broadband Pin Configuration internet based appliances. Pin No. Pin Name Description The MAAM-009811 is fabricated using M/A-COM 1 OUT1 RF Output 1 Technologys pHEMT process to realize low noise 2 N/C No Connection and low distortion. The process features full passivation for robust performance and reliability. 3 N/C No Connection 4 FB Feedback/Bias 5 IN RF Input 1,2 Ordering Information 6 N/C No Connection Part Number Package 7 N/C No Connection MAAM-009811-TR1000 1000 piece reel 8 OUT2 RF Output 2 3 MAAM-009811-TR3000 3000 piece reel 9 Paddle RF and DC Ground 3. The exposed pad centered on the package bottom must be MAAM-009811-001SMB Sample Test Board connected to RF and DC ground. 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, India Tel: +91.80.43537383 China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM-009811 Broadband CATV Single Ended 2-Way Active Splitter Rev. V1 50 - 1100 MHz Electrical Specifications: Freq. = 1000 MHz, T = 25C, V = +3.3 Volts, Z = 75 A DD 0 Parameter Test Conditions Units Min. Typ. Max. Gain IN to OUT1, IN to OUT2 dB 1.5 2.8 3.5 Gain Flatness IN to OUT1, IN to OUT2 dB 0.6 Noise Figure IN to OUT1, IN to OUT2 dB 4.5 Input Return Loss IN dB 12 Output Return Loss OUT1, OUT2 dB 10 Composite Triple Beat, CTB 132 channels, +15 dBmV/channel at the input dBc -65 Composite Second Order, CSO 132 channels, +15 dBmV/channel at the input dBc -55 Reverse Isolation OUT1 to IN, OUT2 to IN dB 29 Output to Output Isolation OUT1 to OUT2 dB 22 Output Power at 1dB Compression, IN to OUT1, IN to OUT2 dBm 4 P1dB 500 MHz, 2-tone, 6 MHz spacing, Output 3rd Order Intercept Point, -15 dBm Pout dBm 20 OIP3 IN to OUT1, IN to OUT2 500 MHz, 2-tone, 6 MHz spacing, Output 2nd Order Intercept Point, -15 dBm Pout mA 35 OIP2 IN to OUT1, IN to OUT2 I V = +3.3 Volts mA 90 120 DD DD 4,5,6 Handling Procedures Absolute Maximum Ratings Please observe the following precautions to avoid Parameter Absolute Maximum damage: RF Input Power 12 dBm Voltage 10.0 volts Static Sensitivity Operating Temperature -20C to +85C Gallium Arsenide Integrated Circuits are sensitive 7 Junction Temperature +150C to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control Storage Temperature -65C to +150C techniques should be used when handling these 4. Exceeding any one or combination of these limits may cause devices. An external protection circuit using an permanent damage to this device. inexpensive anti-parallel diode pair can be used to 5. M/A-COM does not recommend sustained operation near these survivability limits. protect the IC. 6 6. These operating conditions will ensure MTTF > 1 x 10 hours. Please reference application note AN3028 on 7. Junction Temperature (T ) = T + jc * (V * I) J C