MAAM-010333 Optical Node RF Amplifier Rev. V5 50 - 1200 MHz Features Functional Schematic -8 dBm to +2 dBm Optical Input Range Low Equivalent Input Noise (EIN): 3.2 pA/rtHz Single +5 V Bias 24 23 22 21 20 19 29 dB Gain at 55 MHz 34 dB Gain at 1000 MHz 18 RFBA N/C 1 27 dB Gain Control Range RF A RF A 2 17 OUT IN +24 dBmV/ch Output at 550 MHz N/C 3 16 I 2A Lead-Free 4 mm PQFN-24LD Plastic Package ADJ VVA Halogen-Free Green Mold Compound N/C 4 I 2B 15 ADJ RoHS* Compliant RF B 14 OUT RF B 5 IN 13 N/C 6 RFBB 7 8 9 10 11 12 Description The MAAM-010333 provides high gain, low noise and low distortion amplification for optical node 3 applications. Pin Configuration The MAAM-010333 is fabricated using MACOMs Pin No. Pin Name Description low noise GaAs pHEMT technology in a lead-free 4 1 N/C No Connection mm 24-lead package. The amplifier requires a 2 RF A RF Input A IN minimal number of off-chip components resulting in 3 N/C No Connection a highly integrated low cost solution. 4 N/C No Connection 5 RF B RF Input B IN 6 N/C No Connection 7 I B Current Adjust ADJ 8 V 1B + 5V Bias Voltage DD 9 TiltB Tilt Connection 10 V AGC Control Voltage: 0V to 3V AGC 1,2 Ordering Information 11 N/C No Connection 12 InterB Interstage Pin Part Number Description 13 R B Feedback Resistor FB MAAM-010333-TR1000 1000 Piece Reel 14 RF B RF Output B OUT 15 I 2B Current Adjust ADJ MAAM-010333-TR3000 3000 Piece Reel 16 I 2A Current Adjust ADJ MAAM-010333-001SMB Sample Test Board 17 RF A RF Output A OUT 18 R A Feedback Resistor Reference design PCB FB nd MAMU-011089-SMBPPR including 2 stage 19 InterA Interstage Pin MAAM-007807 amplifier 20 N/C No Connection 1. Reference Application Note M513 for reel size information. 21 V + 5V AGC Bias Voltage DD AGC 2. All sample boards include 5 loose parts. 22 TiltA Tilt Connection 23 V 1A + 5V Bias Voltage DD 24 I A Current Adjust ADJ 25 Paddle RF & DC Ground 3. The exposed pad centered on the package bottom must be * Restrictions on Hazardous Substances, connected to RF and DC ground. European Union Directive 2011/65/EU. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAM-010333 Optical Node RF Amplifier Rev. V5 50 - 1200 MHz 4 5 Electrical Specifications : V = +5 V Regulated Supply , T = 25C, Z = 75 DD A 0 Parameter Test Conditions Units Min. Typ. Max. 50 MHz 26.5 29.0 30.5 6,7 Trans-Impedance Gain 870 MHZ dB 31.0 33.0 35.0 1 GHz 31.5 34.0 35.5 V = +3 V 5 8 AGC Gain Tilt dB - - V = 0 V 7 AGC 9 Gain Flatness V : 0 to 3 V dB 0.7 AGC 50 MHz 25.5 29.0 32.0 Gain Control Range 870 MHZ dB 23.0 26.0 29.0 1 GHz 24.0 27.0 30.0 AGC Control Voltage Range 50 MHz - 1 GHz V 0 - +3 7 EIN 50 MHz - 1 GHz pA/rtHz - 3.2 - Output Return Loss 50 MHz - 1 GHz dB - 18 - 10 CTB 79 channels dBc - -68 - 10 CSO 79 channels dBc - -65 - Current V = +5 V mA 225 260 295 DD 4. Performance is specified using JDSU Photodiode EPM-745 or equivalent (EPM705) and output balun MABA-009210-CT1760. 5. MACOM recommends use of a regulated supply voltage in order to limit performance variation. 6. Gain = 20*log(Z /75), where Z = Transconductance (). T T 7. Specified at maximum gain (V = +3.0 V). AGC 8. Positive gain slope from 50 MHz to 1 GHz (tilt of best fit straight line from 50 MHz to 1 GHz). 9. Flatness defined as peak-peak deviation from best fit straight line. 10. Optical Input Power Range: -8 dBm to +2 dBm 79 channels: OMI = 3.5% Pout = +24 dBmV/ch at 550 MHz P = +22.5 dBmV/ch at 55 MHz +24 dBmV/ch at 550 MHz OUT 11,12,13 Handling Procedures Absolute Maximum Ratings Please observe the following precautions to avoid Parameter Absolute Maximum damage: Input Power +3 dBm Optical Operating Voltage +15 volts Static Sensitivity AGC Voltage +5 volts Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be Operating Temperature -40C to +85C damaged by static electricity. Proper ESD control 14 Junction Temperature +150C techniques should be used when handling these devices. Storage Temperature -65C to +150C 11. Exceeding any one or combination of these limits may cause permanent damage to this device. 12. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. 13. Operating at nominal conditions with T +150C will ensure J 6 MTTF > 1 x 10 hours. 14. Junction Temperature (T ) = T + jc * ((V * I) - (P - P )) J C OUT IN Typical thermal resistance ( jc) = 19 C/W. a) For T = 25C, T = 53 C 5 V, 295 mA C J b) For T = 85C, T = 112 C 5 V, 295 mA C J 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: