MAAM-010373 Broadband CATV Amplifier Rev. V4 50 - 1100 MHz Features Functional Schematic 75 Input / Output Match Low Noise Figure: 2.2 dB GND High Gain: 22 dB High Linearity: -74 dBc CTB, -62 dBc CSO High ESD Threshold: HBM Class 1B Lead Free SOT-89 Package Halogen-Free Green Mold Compound RoHS* Compliant and 260C Reflow Compatible Description The MAAM-010373 CATV amplifier is a GaAs MMIC Pin 1 that exhibits low distortion and high gain in a lead- free surface mount package. RF RF GND IN OUT This broadband amplifier employs a monolithic single stage design featuring a convenient 75 input/output impedance that minimizes the number Pin Configuration of external components required. Pin No. Pin Name Description The MAAM-010373 is fabricated using a pHEMT process to realize low noise and low distortion. 1 RF RF Input IN The process features full passivation for robust performance and reliability. 2 GND Ground 3 RF RF Output / Drain Supply OUT 1,2 Ordering Information Part Number Package MAAM-010373-000000 Bulk Packaging MAAM-010373-TR1000 1000 piece reel MAAM-010373-TR3000 3000 piece reel MAAM-010373-001SMB Sample Test Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAM-010373 Broadband CATV Amplifier Rev. V4 50 - 1100 MHz Electrical Specifications: T = 25C, Freq: 50 - 1000 MHz, V = 8 V, Z = 75 A DD 0 Parameter Test Conditions Units Min. Typ. Max. Gain dB 20 22 24 Gain Flatness dB +/- 0.5 1 Noise Figure dB 2.2 3 Input Return Loss dB 18 Output Return Loss dB 20 Reverse Isolation dB 25 Output IP3 6 MHz Spacing, -10 dBm output per tone dBm 40 Output IP2 6 MHz Spacing, -10 dBm output per tone dBm 50 Composite Triple Beat, CTB 80 ch. NTSC flat, +33 dBmV / ch. at the output dBc -74 Composite Second Order, CSO 80 ch. NTSC flat +33 dBmV / ch. at the output dBc -62 P1dB 403.25 MHz dBm 25 I 8 Volts mA 148 165 DD 3,4,5 Handling Procedures Absolute Maximum Ratings Please observe the following precautions to avoid Parameter Absolute Maximum damage: RF Input Power 6 dBm Static Sensitivity Voltage 10 volts Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be Operating Temperature -4 0C to +85 C damaged by static electricity. Proper ESD control techniques should be used when handling these 6 Junction Temperature +150 C devices. Storage Temperature -65C to +150C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. MACOM does not recommend sustained operation near these survivability limits. 5. Operating at nominal conditions with T +150C will ensure J 6 MTTF > 1 x 10 hours. 6. Junction Temperature (T ) = T + * ((V * I) - (P - P )) J C JC OUT IN Typical thermal resistance ( ) = 32C/W. JC a) For T = +25 C, C T = +63C 8 V, 148 mA J b) For T = +85 C, C T = +123C 8 V, 148 mA J 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: