MAAM-011117
75 , 5 V RF Amplifier
Rev. V3
50 - 2700 MHz
Features Functional Schematic
Low Power Consumption: 5 V, 85 mA.
16 dB Flat Gain: 50 MHz - 2700 MHz
Low Noise: 2.7 dB
1 8
RFOUT
IADJ
Power Down Control: I < 4 mA
DD
Current Adjust
Low Distortion Performance
N/C
N/C
Lead-Free 2 mm PDFN-8LD Plastic Package
Halogen-Free Green Mold Compound
VCTRL
RoHS* Compliant
N/C
Description
N/C RFIN
The MAAM-011117 provides high gain, low noise
and low distortion amplification for 75 customer
premises equipment (CPE).
3
The MAAM-011117 incorporates a power-down
Pin Configuration
function to reduce the overall current consumption to
less than 4 mA for standby operation.
Pin No. Pin Name Description
The MAAM-011117 is packaged in a 2 mm 8-lead
1 I Current Control
ADJ
package and requires a minimal number of off-chip
components resulting in a highly integrated low cost
2 N/C No Connection
solution.
Power Down
3 V
CTRL
LO: 0 V; HI: 3.3 V
4 N/C No Connection
5 RF RF Input (75 )
IN
1,2
Ordering Information
6 N/C No Connection
Part Number Package
7 N/C No Connection
MAAM-011117-TR3000 3000 piece reel
8 RF RF Output (75 )
OUT
4
MAAM-011117-001SMB Sample Board 9 Paddle RF and DC Ground
3. MACOM recommends connecting unused package pins to
1. Reference Application Note M513 for reel size information.
ground.
2. All sample boards include 5 loose parts.
4. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
11
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
MAAM-011117
75 , 5 V RF Amplifier
Rev. V3
50 - 2700 MHz
Electrical Specifications: T = 25C, Freq: 50 - 2700 MHz, V = +5 Volts, Z = 75
A DD 0
Parameter Test Conditions Units Min. Typ. Max.
Gain dB 14.7 16 17.2
Gain Flatness dB 0.5
50 MHz - 1.2 GHz 2.7
Noise Figure dB
1.2 GHz - 2.7 GHz 3.0
Reverse Isolation dB 20
Input Return Loss dB 12
Output Return Loss dB 16
Swept frequency: 50 MHz - 870 GHz,
dBm 58
IM Tone at 100 MHz
Input tones at 2.5 GHz and 2.6 GHz,
5
Output IP2 dBm 45
IM Tone at 100 MHz
Input tones at 1.0 GHz and 1.1 GHz,
dBm 50
Input Power = -15 dBm, Output tone 2.1 GHz
Swept frequency from 50 MHz - 870 MHz 35
5
Output IP3 Swept frequency from 870 MHz - 2 GHz dBm 30
Swept frequency from 2.0 - 2.7 GHz 26
Composite Triple Beat, CTB 79 Channels, +15 dBmV / Channel at I/P dBc -75
Composite Second Order, CSO 79 Channels, +15 dBmV / Channel at I/P dBc -65
Cross Modulation, XMOD 79 Channels, +15 dBmV / Channel at I/P dBc -65
Output P1dB 1 GHz dBm 19.5
Power Up: V = 5 V, V = 3.3 V 85 105
DD CTRL
I mA
DD
Power Down: V = 5 V, V = 0 V 3.5
DD CTRL
5. Measured with two tones, 100 MHz spacing, -15 dBm input power per tone.
6,7,8
V Logic Voltages (V = +5 V) Absolute Maximum Ratings
CTRL DD
Parameter Units Min Typ Max Parameter Absolute Maximum
V Logic Low V -0.5 0 0.2 Input Power 7 dBm
CTRL
V Logic High V 1.2 3.3 3.47 Operating Voltage 10 volts
CTRL
I Logic Low mA -0.5 1 Operating Temperature -40C to +85C
CTRL
I Logic High mA -0.5 1 Storage Temperature -65C to +150C
CTRL
6. Exceeding any one or combination of these limits may cause
permanent damage to this device.
7. MACOM does not recommend sustained operation near these
survivability limits.
Handling Procedure - Static Sensitivity
8. Junction Temperature (T ) = T + jc * (V * I)
J C
Gallium Arsenide Integrated Circuits are sensitive to
Typical thermal resistance ( jc) = 73 CW.
electrostatic discharge (ESD) and can be damaged by
a) For T = +25C,
C
static electricity. Proper ESD control techniques should
T = 57C @ 5 V, 85 mA
J
be used when handling these HBM Class 0A, CDM
b) For T = +85C,
C
Class II devices.
T = 117C @ 5 V, 85 mA
J
22
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit: