MAAM-011117 75 , 5 V RF Amplifier Rev. V3 50 - 2700 MHz Features Functional Schematic Low Power Consumption: 5 V, 85 mA. 16 dB Flat Gain: 50 MHz - 2700 MHz Low Noise: 2.7 dB 1 8 RFOUT IADJ Power Down Control: I < 4 mA DD Current Adjust Low Distortion Performance N/C N/C Lead-Free 2 mm PDFN-8LD Plastic Package Halogen-Free Green Mold Compound VCTRL RoHS* Compliant N/C Description N/C RFIN The MAAM-011117 provides high gain, low noise and low distortion amplification for 75 customer premises equipment (CPE). 3 The MAAM-011117 incorporates a power-down Pin Configuration function to reduce the overall current consumption to less than 4 mA for standby operation. Pin No. Pin Name Description The MAAM-011117 is packaged in a 2 mm 8-lead 1 I Current Control ADJ package and requires a minimal number of off-chip components resulting in a highly integrated low cost 2 N/C No Connection solution. Power Down 3 V CTRL LO: 0 V HI: 3.3 V 4 N/C No Connection 5 RF RF Input (75 ) IN 1,2 Ordering Information 6 N/C No Connection Part Number Package 7 N/C No Connection MAAM-011117-TR3000 3000 piece reel 8 RF RF Output (75 ) OUT 4 MAAM-011117-001SMB Sample Board 9 Paddle RF and DC Ground 3. MACOM recommends connecting unused package pins to 1. Reference Application Note M513 for reel size information. ground. 2. All sample boards include 5 loose parts. 4. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAM-011117 75 , 5 V RF Amplifier Rev. V3 50 - 2700 MHz Electrical Specifications: T = 25C, Freq: 50 - 2700 MHz, V = +5 Volts, Z = 75 A DD 0 Parameter Test Conditions Units Min. Typ. Max. Gain dB 14.7 16 17.2 Gain Flatness dB 0.5 50 MHz - 1.2 GHz 2.7 Noise Figure dB 1.2 GHz - 2.7 GHz 3.0 Reverse Isolation dB 20 Input Return Loss dB 12 Output Return Loss dB 16 Swept frequency: 50 MHz - 870 GHz, dBm 58 IM Tone at 100 MHz Input tones at 2.5 GHz and 2.6 GHz, 5 Output IP2 dBm 45 IM Tone at 100 MHz Input tones at 1.0 GHz and 1.1 GHz, dBm 50 Input Power = -15 dBm, Output tone 2.1 GHz Swept frequency from 50 MHz - 870 MHz 35 5 Output IP3 Swept frequency from 870 MHz - 2 GHz dBm 30 Swept frequency from 2.0 - 2.7 GHz 26 Composite Triple Beat, CTB 79 Channels, +15 dBmV / Channel at I/P dBc -75 Composite Second Order, CSO 79 Channels, +15 dBmV / Channel at I/P dBc -65 Cross Modulation, XMOD 79 Channels, +15 dBmV / Channel at I/P dBc -65 Output P1dB 1 GHz dBm 19.5 Power Up: V = 5 V, V = 3.3 V 85 105 DD CTRL I mA DD Power Down: V = 5 V, V = 0 V 3.5 DD CTRL 5. Measured with two tones, 100 MHz spacing, -15 dBm input power per tone. 6,7,8 V Logic Voltages (V = +5 V) Absolute Maximum Ratings CTRL DD Parameter Units Min Typ Max Parameter Absolute Maximum V Logic Low V -0.5 0 0.2 Input Power 7 dBm CTRL V Logic High V 1.2 3.3 3.47 Operating Voltage 10 volts CTRL I Logic Low mA -0.5 1 Operating Temperature -40C to +85C CTRL I Logic High mA -0.5 1 Storage Temperature -65C to +150C CTRL 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. MACOM does not recommend sustained operation near these survivability limits. Handling Procedure - Static Sensitivity 8. Junction Temperature (T ) = T + jc * (V * I) J C Gallium Arsenide Integrated Circuits are sensitive to Typical thermal resistance ( jc) = 73 CW. electrostatic discharge (ESD) and can be damaged by a) For T = +25C, C static electricity. Proper ESD control techniques should T = 57C 5 V, 85 mA J be used when handling these HBM Class 0A, CDM b) For T = +85C, C Class II devices. T = 117C 5 V, 85 mA J 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: