75 , 8 V RF Amplifier 45 - 1218 MHz MAAM-011182 Rev. V4 Features Functional Schematic Single Stage, Single Ended, 8 V, 130 mA 18 dB Flat Gain Low Noise RF V OUT 1 8 FDBACK Low Distortion Performance Lead-Free 2 mm 8-lead PDFN Plastic Package RoHS* Compliant N/C N/C 2 7 Applications N/C 3 6 N/C CATV Description V RF BIAS IN 4 5 IN The MAAM-011182 is an RF amplifier assembled in a 2 mm 8-lead PDFN plastic package. This amplifier provides 18 dB of ultra flat gain while biased at 8 volts. The amplifier provides excellent linearity. 3 Pin Configuration The MAAM-011182 provides high gain, low noise and low distortion making it ideally suited for 75 infrastructure applications. 1 RF RF Output (75 ) OUT The MAAM-011182 is fabricated using GaAs 2,3,6,7 N/C No Connection pHEMT technology. 4 V Regulator Bias Input BIAS IN 5 RF RF Input (75 ) IN 1,2 Ordering Information 8 V Feedback Path FDBACK 3 9 Pad RF and DC Ground 3. The exposed pad centered on the package bottom must be MAAM-011182 Bulk Packaging connected to RF and DC ground. MAAM-011182-TR1000 1000 Part Reel MAAM-011182-TR3000 3000 Part Reel MAAM-011182-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: 75 , 8 V RF Amplifier 45 - 1218 MHz MAAM-011182 Rev. V4 Electrical Specifications: Freq. = 50 - 1218 MHz, T = 25C, V = 8 V, Z = 75 A DD 0 Parameter Test Conditions Units Min. Typ. Max. Gain 1218 MHz dB 18 18.5 19 Tilt dB 0 0.3 1 Reverse Isolation dB 21.5 Input Return Loss dB 20 Output Return Loss dB 19 50 - 100 MHz 2.7 3.8 Noise Figure dB 100 - 1218 MHz 2.5 3.0 50 - 1200 MHz, tone spacing 6 MHz, Output IP2 dBm 66 P per tone = -10 dBm OUT 50 - 1200 MHz, tone spacing 6 MHz, Output IP3 dBm 38 P per tone = -10 dBm OUT P1dB dBm 24 79 channels, 0 dB Tilt, 34 dBmV per Composite Triple Beat, CTB dBc 76 -74 channel output QAM to 1200 MHz 79 channels, 0 dB Tilt, 34 dBmV per Composite Second Order, CSO dBc 68 -66 channel output QAM to 1200 MHz I V = 8 V mA 125 130 135 DD DD 4,5,6,7 Absolute Maximum Ratings Handling Procedures Please observe the following precautions to avoid damage: Input Power 12 dBm Static Sensitivity Operating Voltage 10 volts These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged Operating Temperature -40C to +85C by static electricity. Proper ESD control techniques should be used when handling these HBM Class1A, Storage Temperature -65C to +150C CDM Class IV devices. 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 6 6. These operating conditions will ensure MTTF > 1 x 10 hours. 7. Junction Temperature (T ) = Case Temperature (T ) + jc*(V*I) J C Typical thermal resistance ( ) = 43.3C/W. JC a) For T = 25C, C T = 71.7C 8 V, 135 mA J b) For T = 85C, C T = 131.7C 8 V, 135 mA J 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: