Wideband Distributed Amplifier 100 kHz - 50 GHz MAAM-011238 Rev. V6 Features Functional Schematic Gain: 14 dB 6 V, 30 GHz P1dB: 17 dBm 6 V, 30 GHz P3dB: 18.5 dBm 6 V, 30 GHz 12 11 10 9 8 Integrated Power Detector Gain control with only positive bias voltages 50 Input and Output Match Bias Voltage: VDD = 4 - 6 V Bias Current: IDSQ = 125 - 150 mA 5 mm SMT Package 7 RFOUT/VDD 1 RFIN RoHS* Compliant 30 Applications Instrumentation and Communication Systems VG AUX Description 5 6 2 3 4 MAAM-011238 is an easy-to-use, wideband amplifier that operates from 100 kHz to 50 GHz. The amplifier provides 14 dB gain, 5 dB noise figure and 18.5 dBm of P3dB output power 30 GHz. It is matched to 50 with typical return loss of 12 dB. 2,3,4 Pin Configuration The amplifier requires only positive bias voltages and would typically be operated at 6 V and 135 mA. Pin Pin Name Description MAAM-011238 is suitable for a wide range of 1 RFIN RF Input / Gate Voltage applications in instrumentation and communication systems. 5 V Gate Voltage 1 G1 This part is also available as a bare die. Refer to 6 V Auxiliary Gate Voltage GAUX datasheet MAAM-011238-DIE. 7 RFOUT/VDD RF Output / Drain Voltage 1 8 VDET Detector Voltage Ordering Information 11 V Auxiliary Drain Voltage DAUX 12 V Gate Voltage 2 G2 MAAM-011238-TR0100 100 part reel 2, 3, 4, N/C No Connection MAAM-011238-TR0500 500 part reel 9, 10 2. MACOM recommends connecting all no connection (N/C) pins MAAM-011238-SB1 Sample Board to ground. 3. The exposed pad centered on the package bottom must be 1. Reference Application Note M513 for reel size information. connected to RF, DC and thermal ground. 4. Internal to package are 100 pF decoupling capacitors on pins 5, 6, 8, 11, 12. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 111 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: Wideband Distributed Amplifier 100 kHz - 50 GHz MAAM-011238 Rev. V6 5,6,7 Electrical Specifications : T = 25 C, V = 6 V, I = 135 mA, Z = 50 A DD DSQ 0 0.01 - 10 GHz 13.0 16.0 10 - 20 GHz 12.5 15.0 20 - 30 GHz 11.0 14.0 Gain dB 30 - 40 GHz 11.0 13.0 40 - 43.5 GHz 10.0 12.5 43.5 - 50 GHz 12.5 2 - 10 GHz 5.0 10 - 20 GHz 4.0 20 - 30 GHz 5.0 Noise Figure dB 30 - 40 GHz 7.0 40 - 43.5 GHz 6.5 43.5 - 50 GHz 9.0 0.01 - 20 GHz 20.0 20 - 30 GHz 12.0 Input Return Loss 30 - 40 GHz dB 10.0 40 - 43.5 GHz 11.0 43.5 - 50 GHz 10.5 0.01 - 10 GHz 19.5 10 - 20 GHz 20.0 20 - 30 GHz 13.0 Output Return Loss dB 30 - 40 GHz 9.5 40 - 43.5 GHz 10.0 43.5 - 50 GHz 11.0 0.1 - 10 GHz 20.0 21.5 10 - 20 GHz 19.5 21.0 20 - 30 GHz 18.0 19.5 P P = 11 dBm dBm OUT IN 30 - 40 GHz 17.0 19.0 40 - 43.5 GHz 17.0 18.7 43.5 - 50 GHz 18.3 0.1 - 20 GHz 18.0 20 - 30 GHz 17.0 P1dB 30 - 40 GHz dBm 16.0 40 - 43.5 GHz 15.5 43.5 - 50 GHz 15.0 0.1 - 10 GHz 20.5 10 - 20 GHz 20.0 P3dB 20 - 30 GHz dBm 18.5 30 - 40 GHz 18.0 40 - 50 GHz 17.0 0.01 - 10 GHz 28.0 10 - 20 GHz 29.0 20 - 30 GHz 27.0 Output IP3 dBm 30 - 40 GHz 25.0 40 - 43.5 GHz 24.0 43.5 - 50 GHz 20.5 Drain Current Quiescent bias mA 135 5. Set IDSQ according to bias procedures in page 3. 6. Graphs in datasheet use test conditions shown unless otherwise stated. 7. All data measured with package assembled as per the Assembly Guideline. 222 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: