MAAM-011240 75 , Differential RF Amplifier Rev. V1 5 - 1218 MHz Features Functional Schematic Single Stage, Differential Amplifier 5 V, 290 mA Operation 17 dB Flat Gain Low Noise 1 RF + RF + 8 OUT IN Low Distortion Performance ESD Class 1B for HBM N/C N/C 2 7 Lead-Free SOIC-8EP Plastic Package Halogen-Free Green Mold Compound RoHS* Compliant N/C N/C 6 3 Description RF - RF - IN 4 5 OUT The MAAM-011240 is high gain, high linearity and low noise differential RF amplifier assembled in a SOIC-8EP plastic package. This amplifier provides 17 dB of flat gain with very low noise figure. The differential push-pull topology provides superior 2nd Pin Configuration order intermodulation performance. Pin No. Pin Name Function The MAAM-011240 provides high gain, low noise 1 RF + RF Input + IN and low distortion making it ideally suited for 75 infrastructure applications. 2 N/C No Connection 3 N/C No Connection The MAAM-011240 is fabricated using GaAs pHEMT technology. 4 RF - RF Input - IN 5 RF - RF Output - / V OUT DD 1,2 Ordering Information 6 N/C No Connection Part Number Package 7 N/C No Connection MAAM-011240 Bulk Packaging 8 RF + RF Output + / V OUT DD 3 9 Pad RF and DC Ground MAAM-011240-TR1000 1000 Part Reel 3. The exposed pad centered on package bottom must be MAAM-011240-TR3000 3000 Part Reel connected to RF and DC ground. Sample Board, MAAM-011240-001SMB 45 - 1218 MHz Sample Board, MAAM-011240-002SMB 5 - 300 MHz 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAM-011240 75 , Differential RF Amplifier Rev. V1 5 - 1218 MHz Electrical Specifications: T = 25C, V = 5 V, Z = 75 A DD 0 Performance specified with input/output balun MABA-009210-CT1760 Parameter Test Conditions Units Min. Typ. Max. Gain 1218 MHz dB 16.2 17 18.5 Tilt 45 - 1218 MHz dB 0 Reverse Isolation 45 - 1218 MHz dB 21 Input Return Loss 45 - 1218 MHz dB 20 Output Return Loss 45 - 1218 MHz dB 20 45 MHz 1.7 Noise Figure dB 1218 MHz 2.6 45 - 1218 MHz, tone spacing 6 MHz Output IP2 dBm 63 P per tone = +13 dBm OUT 45 - 1218 MHz, tone spacing 6 MHz Output IP3 dBm 44 P per tone = +13 dBm OUT P1dB 45 - 1218 MHz dBm 25 79 channels, 0 dB Tilt, 39 dBmV per Composite Triple Beat, CTB dBc -75 channel output, QAM to 1000 MHz 79 channels, 0 dB Tilt, 39 dBmV per Composite Second Order, CSO dBc -77 channel output, QAM to 1000 MHz 62 dBmV output, Single Channel: 4 ACPR 79 MHz dBc -70 1218 MHz -64 I V = 5 V mA 290 350 DD DD 4. Adjacent Channel (750 kHz from channel block edge to 6 MHz from channel block edge), 256 QAM, 5.36 Msym/sec. 5,6,7 Absolute Maximum Ratings Handling Procedures Please observe the following precautions to avoid Parameter Absolute Maximum damage: Max Input Power 10 dBm Operating Voltage 8 V Static Sensitivity Operating Temperature -40C to +85C Integrated Circuits are sensitive to electrostatic Storage Temperature -65C to +150C discharge (ESD) and can be damaged by static 8 electricity. Proper ESD control techniques should be Junction Temperature +150C used when handling these (HBM) Class 1B devices. 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. MACOM does not recommend sustained operation near these survivability limits. 7. Operating at nominal conditions with T < 150C will ensure J 6 MTTF > 1 x 10 hours. 8. Junction Temperature (T ) = Case Temperature (T ) + *(V*I) J C JC Typical thermal resistance ( ) = 29C/W. JC a) For T = 25C, C T = 67C 5 V, 290 mA J b) For T = 85C, C T = 127C 5 V, 290 mA J 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: