MAAM26100-B1 GaAs MMIC Power Amplifier Rev. V7 2 - 6 GHz 3,4 Features Functional Diagram Saturated Power: 30.5 dBm Typical VDD Gain: 19 dB Typical 1000 pF Power Added Efficiency: 30% 1000 pF DC Decoupled RF Input and Output Lead-Free 7-Lead Ceramic Package 6 5 4 3 RoHS* Compliant and 260C Reflow Compatible Description The MAAM26100-B1 is a GaAs MMIC two stage high efficiency power amplifier in a small, lead-free, 7-leadceramic package. The MAAM26100 7 2 RF RF -B1 is a fully monolithic design which eliminates the IN OUT need for external circuitry in 50-ohm systems. The MAAM26100-B1 is ideally suited for driver amplifiers and transmitter outputs in UMTS applications, test equipment, electronic warfare 1 jammers, missile subsystems and phased array radars. VGG The MAAM26100-B1 is fabricated using a mature 3. Nominal bias is obtained by first connecting 5 volts to pin 1 0.5-micron gate length GaAs process. The process (V ), followed by connecting +8 volts to pin 5 (V ) and pin 4 GG D1 (V ). Note sequence. features full passivation for increased D2 4. RF ground and thermal interface are the case bottom. performance reliability. Adequate heat sinking is required. 1,2 Pin Configuration Absolute Maximum Ratings Pin No. Function Pin No. Function Parameter Absolute Maximum 1 V 5 V GG D1 V +9 V DD 2 RF Output 6 Internal Ground V -6 V to -3 V GG 3 Internal Ground 7 RF Input RF Input Power +17 dBm 4 V D2 Channel Temperature 150C Storage Temperature -65C to +150C 1. Exceeding any one or combination of these limits may cause Ordering Information permanent damage to this device and will void product warranty. Part Number Package 2. M/A-COM Tech does not recommend sustained operation near these survivability limits. MAAM26100-B1 7 lead, Ceramic (CR-2) 7 lead, Ceramic (CR-2) MAAM26100-B1G with Gull Wing * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAM26100-B1 GaAs MMIC Power Amplifier Rev. V7 2 - 6 GHz Electrical Specifications: T = 25C, V = +8 V, V = -5 V, Z = 50 A DD GG 0 Parameter Test Conditions Units Min. Typ. Max. Small Signal Gain 2 - 6 GHz dB 15 19 Input VSWR Input Power +14 dBm, 2 - 6 GHz Ratio 1.7:1 2.1:1 Output VSWR Input Power +14 dBm, 2 - 6 GHz Ratio 2.2:1 Saturated Output Power Input Power +14 dBm, 2 - 6 GHz dBm 29 30.5 Output Power at 1 dB Gain 2 - 6 GHz dBm 27 Compression Power Added Efficiency % 30 Third Order Intercept 2 - 6 GHz dBm 39 Reverse Isolation 2 - 6 GHz dB 30 I No RF mA 390 DSQ I Input Power +14 dBm mA 300 475 650 DS I Input Power +14 dBm mA 10 GG 5 Thermal Resistance C/W 16.5 5. Attachment method not included. Lead-Free CR-2 Lead-Free CR-2 w/ Gull Wing Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: