MAAP-010171 Amplifier, Power, 8 W Rev. V3 2.5 - 3.5 GHz Features Functional Schematic Linear Gain: 27 dB Saturated Output Power: +39 dBm Pulsed 50 Input / Output Match Lead-Free 5 mm 20-lead PQFN Package 20 19 18 17 16 Halogen-Free Green Mold Compound RoHS* Compliant and 260C Reflow Compatible GND GND 1 15 2 14 Description GND GND The MAAP-010171 is a 2-stage, 8 W saturated 3 13 RF RF IN OUT S-band power amplifier in a 5mm 20 lead PQFN package, allowing easy assembly. This product is GND 4 12 GND fully matched to 50 ohms on both the input and GND 5 11 GND output. It can be used as a power amplifier stage or as a driver stage in high power pulsed applications. 10 6 7 8 9 It is ideally suited for Air Traffic Control, Weather, Military and S-band radar applications. Each device is 100% RF tested to ensure performance compliance. 2 Pin Configuration Pin No. Function Pin No. Function 1 Ground 11 Ground 2 Ground 12 Ground 1 Ordering Information 3 RF 13 RF IN OUT Part Number Package 4 Ground 14 Ground MAAP-010171-TR0500 500 piece reel 5 Ground 15 Ground 6 V 1b 16 V 2a MAAP-010171-TR1000 1000 piece reel G D 7 V 2b 17 V 2a G D MAAP-010171-000SMB Sample Board 8 V 1b 18 V 1a D D 1. Reference Application Note M513 for reel size information. 9 V 2b 19 V 2a D G 10 V 2b 20 V 1a D G 3 21 Paddle 2. MACOM recommends connecting unused package pins to ground. 3. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAP-010171 Amplifier, Power, 8 W Rev. V3 2.5 - 3.5 GHz Electrical Specifications: Freq. 2.5 - 3.5 GHz, V = 9 V Pulsed, 100 s Pulse Width, 10% Duty Cycle, Z = 50 DD 0 Parameter Units Min. Typ. Max. Gain dB 25 27 Input Return Loss dB 10 Output Return Loss dB 10 P dBm 37 39 SAT Small Signal Current (I ) A 1 DD Efficiency % 38 4,5 Absolute Maximum Ratings Parameter Absolute Maximum Input Power 22 dBm Handling Procedures Please observe the following precautions to avoid Supply Voltage 11 V damage: Gate Current 25 mA Duty Cycle 50 % Static Sensitivity Operating Temperature -40C to +85C Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be 6,7 Junction Temperature +150C damaged by static electricity. Proper ESD control Storage Temperature -55C to +150C techniques should be used when handling these class 1A devices. 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 6. Operating at nominal conditions with T 150C will ensure J 6 MTTF > 1 x 10 hours. 7. Junction Temperature (T ) = T + * (V * I). J C JC Typical thermal resistance ( ) = 5.75C/W JC 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: