Power Amplifier, 8 W
5.2 - 5.9 GHz
MAAP-011027
Rev. V4
Functional Schematic
Features
Linear Gain: 20 dB
Saturated Output Power: 39 dBm Pulsed
50 Input / Output Match
Lead-Free 5 mm 20-lead PQFN Package
20 18 17 16
19
RoHS* Compliant
GND 1 15 GND
Applications
Point-to-Point Radios
2 14
GND GND
C-Band Radar
3 13
RF RF
IN OUT
Description
GND 4 12 GND
The MAAP-011027 is a 2-stage, 8 W saturated
C-band power amplifier in a 5 mm 20 lead PQFN
5 11
GND GND
package, allowing for easy assembly. This product
is fully matched to 50 ohms on both the input and
output. It can be used as a power amplifier stage or 10
6 7 8 9
as a driver stage in high power pulsed applications.
Each device is 100% RF tested to ensure
performance compliance.
2
Pin Configuration
1,2,4,5,11,
Ground 13 RF
OUT
12,14,15,
1
Ordering Information
3 RF 16,17 V 2a
IN D
6 V 1b 18 V 1a
Part Number Package G D
7 V 2b 19 V 2a
MAAP-011027-TR0500 500 piece reel G G
8 V 1b 20 V 1a
MAAP-011027-TR1000 1000 piece reel D G
3
MAAP-011027-000SMB Sample Board 9,10 V 2b 21 Paddle
D
2. MACOM recommends connecting unused package pins to
1. Reference Application Note M513 for reel size information.
ground.
3. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, compliant to current RoHS EU directive.
111
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
Power Amplifier, 8 W
5.2 - 5.9 GHz
MAAP-011027
Rev. V4
Electrical Specifications:
Freq. 5.2 - 5.9 GHz, V = 9 V Pulsed, 100 s Pulse Width,10% Duty Cycle , Z = 50
DD 0
Gain dB 17 20
Input Return Loss dB 10
Output Return Loss dB 10
P dBm 37 39
SAT
Pulse Period s 100
Pulse Duty Cycle % 10
Efficiency % 37
Small Signal Current A 1
4,5,6
Maximum Operating Ratings
Handling Procedures
Please observe the following precautions to avoid
damage:
Input Power 28 dBm
Static Sensitivity
Supply Voltage 11 V
Gallium Arsenide Integrated Circuits are sensitive to
electrostatic discharge (ESD) and can be damaged
7
Junction Temperature +150 C by static electricity. Proper ESD control techniques
should be used when handling these class 1A
Operating Temperature -40C to +85C devices.
Storage Temperature -55C to +150C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. MACOM does not recommend sustained operation near these
survivability limits.
6. Operating at nominal conditions with T +150C will ensure
J
6
MTTF > 1 x 10 hours.
7. Junction Temperature (T ) = T + * (V * I)
J C JC
Typical CW thermal resistance ( ) = 7.7C/W
JC
222
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit: