MAAP-011145-STD Power Amplifier, 2 W Rev. V2 17.65 - 19.75 GHz Features Functional Schematic 25 dB Small Signal Gain 43 dBm Third Order Intercept Point (OIP3) >2 W Output P1dB 34.5 dBm Saturated Output Power Integrated Power Detector Bias 1330 mA 6 V Lead-Free 7 mm Cavity Package RoHS* Compliant and 260C Reflow Compatible Description The MAAP-011145-STD is a power amplifier assembled in a 7 mm surface mount package with a temperature compensated integrated power detector operating from 17.65 to 19.75 GHz. The circuit provides 25 dB gain, 43 dBm OIP3, 2 W P1dB and 34.5 dBm saturated output power. The device includes ESD protection and by-pass capacitors to ease the implementation and volume assembly of the packaged part. 2 Pin Configuration This power amplifier is specifically designed for use in point-to-point radios for cellular backhaul applications in the 18 GHz band. 1 Ground 11 Ground 2 RF Input 12 RF Output 3 Ground 13 Power Detector 4 Ground 14 Reference 5 Gate 1 Bias 15 Ground 1 6 Gate 2 Bias 16 No Connection Ordering Information 7 Gate 3 Bias 17 Ground Part Number Package 8 Ground 18 Drain 2 Bias MAAP-011145-STD Bulk Quantity 9 Drain 3 Bias 19 Drain 1 Bias MAAP-011145-STR500 500 Piece Reel 10 Ground 20 Ground MAAP-011145-001SMB Sample Board 3 21 Paddle 1. Reference Application Note M513 for reel size information. 2. All No Connection pins should be grounded. 3. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. North America Tel: 800.366.2266 / Fax: 978.366.2266 Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 MAAP-011145-STD Power Amplifier, 2 W Rev. V2 17.65 - 19.75 GHz 4 Electrical Specifications: V = 6 V, I = 1330 mA, T = +25C DD DQ A Small Signal Gain dB 22.7 26 28.3 P dBm 33.2 34.5 SAT Output IP3, +20 dBm SCL dBm 40.5 44 Output IP3, +24 dBm SCL dBm 37.5 42 P1dB dBm 34 Input Return Loss dB 15 Output Return Loss dB 10 Detector V , P = +20dBm V 0.5 1.1 1.7 diff out Noise Figure dB 7 Gain Ripple over frequency dB 2 Gate Voltage V -0.60 4. Adjust V 1,V 2 and V 3 between -1.2 and -0.6 V to achieve specified I (I = I 1+I 2+I 3). V 1,V 2 and V 3 are nominally the same G G G DQ DQ D D D G G G voltage. 2 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. North America Tel: 800.366.2266 / Fax: 978.366.2266 Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298