1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Features Functional Schematic Gain: 24.5 dB P : 29 dBm -1dB P : 30 dBm SAT PAE at P : 40% SAT 16 15 14 13 OIP3: 40 dBm Bias Conditions: 9 V, 265 mA N/C N/C 12 1 Fully Matched Output Lead-Free 3 mm 16-LD PQFN package N/C N/C 2 11 RoHS* Compliant N/C N/C 3 10 Applications N/C 4 9 N/C LMR MILCOM 5 6 7 8 SATCOM Sensors & Telemetry Test & Measurement Description 3,4 The MAAP-011232 is a 2-stage power amplifier with Pin Configuration gain shut off, operating from 100 MHz to 3 GHz. For operation in the 100 MHz to 1 GHz frequency range no I/O matching is required. Internal DC blocking is provided at the input, while the RF output port is DC 1 - 4, 9 - 12 No Connection coupled through an external bias-tee. Bias current, RF gain and output power are controlled with a gate 5 Drain Voltage V 1 D bias voltage (V ). Typical current consumption is G <300 mA at maximum output power. 6, 8, 13, 15 Ground The MAAP-011232 is well suited to both power and 7 RF Input driver requirements for multiple applications. RF Output & 14 The MAAP-011232 is fabricated using a GaAs Drain Voltage V 2 D D-mode high breakdown process which features full 16 Shut Off Voltage V G passivation for increased performance and reliability. 3. MACOM recommends connecting unused package pins to 1,2 ground. Ordering Information 4. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. MAAP-011232 Bulk MAAP-011232-TR0500 500 Piece Reel MAAP-011232-TR1000 1000 Piece Reel MAAP-011232-001SMB Sample Board Type A MAAP-011232-002SMB Sample Board Type B 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: 1 W Driver Amplifier with VG Enable 0.1 - 3.0 GHz MAAP-011232 Rev. V3 Electrical Specifications: Freq. = 1 GHz, T = +25C, V 1 = V 2 = 9 V, I 2 = 200 mA, Z = 50 , A D D DQ 0 V pulsed with 1 ms pulse width and 10% duty cycle G Symbol Small-Signal Gain SSG -10 dBm input drive level dB 23 24.5 Output Power at 1dB compression P dBm 29 -1dB Saturated Output Power P 3 dB Gain compression dBm 28.5 30 SAT Power Added Efficiency PAE 3 dB Gain compression % 35 40 Reverse Isolation S12 -10 dBm input drive level dB 50 Input Return Loss IRL -10 dBm input drive level dB 8 Output Return Loss ORL -10 dBm input drive level dB 12 Output Third Order Intercept OIP3 -13 dBm/tone, F1-F2 = 6 MHz dBm 40 Gate Bias Voltage V 3 dB Gain compression V -0.75 -0.55 -0.30 G Quiescent Drain Current I 1 mA 65 DQ Schematic of the Production Test Board VD1 VG C4 C5 VD2 L2 4 3 2 Pin 1 5 16 C2 L3 6 15 14 RF IN 7 RF OUT C3 13 8 9 10 11 12 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: