MAAP-118260 Power Amplifier Rev. V1 18 - 26 GHz Features Functional Schematic Fully Integrated Power Amplifier Wide Bandwidth 17.7 - 26.5 GHz 28.5 dB Small Signal Gain 24 23 22 21 20 19 37.0 dBm Third Order Intercept Point (OIP3) 28.5 dBm Output P1dB 1 18 N/C Pdet env Integrated Power Detector 2 17 N/C GND Typical Bias 5 V, 650 mA Lead-Free 5 mm 24-lead QFN Package GND 3 16 RF OUT 4 RF 15 IN GND Description The MAAP-118260 is a packaged linear power 5 14 GND N/C amplifier that operates over the frequency range 6 13 N/C Pdet env 17.7 - 26.5 GHz. The device provides 28.5 dB of gain and 37.0 dBm Output Third Order Intercept 7 8 9 10 11 12 Point (OIP3) with more than 28.5 dBm of Output P1dB. This power amplifier is assembled in a lead free, fully molded 5 mm, 24 lead, QFN package and 3,4 Pin Configuration consists of a four stage power amplifier with integrated, on-chip power and envelope detectors. Pin No. Function Pin No. Function The device includes on-chip ESD protection 1 No Connection 13 Pdet env structures to ease the implementation and volume assembly. 2 No Connection 14 No Connection The device is well suited for use in the 18 GHz, 3 GND 15 GND 23 GHz, 26 GHz cellular backhaul applications. 4 RF 16 RF IN OUT 5 GND 17 GND 6 No Connection 18 Pdet env 7 V 1,2 19 Pdet peak G 1,2 Ordering Information 8 V 3,4 20 V 4 G D Part Number Package 9 No Connection 21 V 3 D 10 No Connection 22 No Connection MAAP-118260 Bulk 11 V 4 23 V 1,2 MAAP-118260-TR0500 Tape and Reel D D MAAP-118260-001SMB Sample Board 12 Pdet peak 24 No Connection 1. Reference Application Note M513 for reel size information. 3. MACOM recommends connecting unused package pins to 2. All sample boards include 5 loose parts. ground. 4. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAP-118260 Power Amplifier Rev. V1 18 - 26 GHz Electrical Specifications: Freq. = 17.7 - 26.5 GHz, T = 25C, V = +5 V, Z = 50 A D 0 Parameter Test Conditions Units Min. Typ. Max. 17.7 - 20.0 GHz 25 29.5 Gain 20.0 - 24.0 GHz dB 24 28.5 24.0 - 26.5 GHz 23 25.5 17.7 - 20.0 GHz 28.0 P1dB, 1 dB Compression 20.0 - 24.0 GHz dBm 29.0 24.0 - 26.5 GHz 28.5 17.7 - 20.0 GHz 29 30.5 P 20.0 - 24.0 GHz dBm 29 31.0 SAT 24.0 - 26.5 GHz 29 30.5 17.7 - 20.0 GHz 36 37.0 OIP3 20.0 - 24.0 GHz dBm 34 36.7 24.0 - 26.5 GHz 34 36.5 17.7 - 20.0 GHz 13 Input Return Loss 20.0 - 24.0 GHz dB 9.5 24.0 - 26.5 GHz 14 17.7 - 20.0 GHz 12 Output Return Loss 20.0 - 24.0 GHz dB 11 24.0 - 26.5 GHz 15 PAE, 1 dB Compression % 18 Quiescent Current mA 590 662 5,6,7 8,9 Absolute Maximum Ratings Maximum Operating Ratings Parameter Rating Parameter Rating Drain Voltage (V 1,2,3,4) D P 4.87 W 9 V DISS (Under No RF Drive) Drain Voltage (V 1,2,3,4) D 5.5 V Operating Temperature -40C to +85C (Under RF Drive) Gate Voltage (V 1,2,3,4) -3 V G Junction Temperature +150C 8. Junction temperature directly affects device MTTF. Junction Storage Temperature -65C to +150C temperature should be kept as low as possible to maximize lifetime. Thermal resistance, jc is 18.4 C/W. Junction Temperature +175C 9. For saturated performance, it is recommended that the sum of (2V + abs (V )) < 12 V. DD GG 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. MACOM does not recommend sustained operation near these survivability limits. 7. Operating at nominal conditions with T +150C will ensure J 6 MTTF > 1 x 10 hours. 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: