MABA-008639-TC41T7 MACOM

MABA-008639-TC41T7 E-Series RF 1:4 Transmission Line Step-up Transformer Rev. V3 6 -1000 MHz Features Surface mount 1:4 Impedance Ratio RoHS* Compliant Pb Free 0 260 C reflow compatible. Available on Tape and Reel Description MABA-008639-TC41T7 is a wire welded RoHS version of ETC4-1T-7. This 1:4 RF transformer is assembled in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Typical applications include single to Schematic balanced mode conversion and impedance matching. Ordering Information Pin Configuration Part Number Package MABA-008639-TC41T7 2000 piece reel * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MABA-008639-TC41T7 E-Series RF 1:4 Transmission Line Step-up Transformer Rev. V3 6 -1000 MHz Electrical Specifications: T = 25C, Z = 50 A 0 Parameter Frequency Units Min Typ Max 6 - 600 MHz 2.0 Insertion Loss dB - 600 - 1000 MHz 3.0 Amplitude Unbalance 6 - 1000 MHz dB - 1.0 Phase Unbalance 6 - 1000 MHz - 10 1,2 Recommended Maximum Ratings Parameter Value RF Power 250 mW DC Current 30 mA Operating Temperature -40C to +85C Storage Temperature -55C to +100C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. MACOM does not recommend sustained operation near these survivability limits. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: