MABA-009210-CT17TB MACOM

MABA-009210-CT1760 1:1 Transmission Line Balun Rev. V3 50 - 1200 MHz Features Functional Schematic Surface Mount 1:1 Impedance Excellent temperature stability RoHS Compliant 260C Reflow compatible Description The MABA-009210-CT1760 is a 1:1 RF transmission line Transformer in a low cost surface mount package. Ideally suited for high volume CATV/ Broadband application. Suitable for use in 50 Ohm and 75 Ohm systems. Ordering Information Pin Configuration Part Number Package Pin Number Function MABA-009210-CT1760 900 piece reel 1 Primary Dot (input) MABA-009210-CT17TB Sample Board 2 Secondary (o/p coupled) 3 Secondary Dot (o/p through) 4 Primary (ground) Electrical Specifications: Freq. = 50 - 1200 MHz, T = +25C, Z = 75 A 0 Parameter Test Conditions Units Min. Typ. Max. 50 MHz 0.13 0.33 Insertion Loss 1 870 MHz 0.53 0.93 dB (Through) Pin 3 to pin 1 1002 MHz 0.63 1.18 1200 MHz 0.83 1.93 50 MHz 0.43 0.62 Insertion Loss 2 870 MHz 0.33 0.63 dB (Coupled) Pin 2 to pin 1 1002 MHz 0.43 0.78 1200 MHz 0.63 1.33 50 MHz 0.3 -0.6 870 MHz -0.1 +0.7 Amplitude Balance dB 1002 MHz -0.2 +0.7 1200 MHz -0.2 +0.8 50 - 1002 MHz 1.2 4.0 Phase Balance 1002 - 1200 MHz 3.2 8.0 50 - 500 MHz 18.0 23.0 Input Return Loss 500 - 1002 MHz dB 17.5 19.0 1002 - 1200 MHz 11.0 18.0 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MABA-009210-CT1760 1:1 Transmission Line Balun Rev. V3 50 - 1200 MHz Absolute Maximum Ratings Recommended Footprint Parameter Absolute Maximum RF Power 500 mW DC Current 500 mA Operating/Storage Temperature -40C to +85C Outline Drawing Tape & Reel Information Parameter Units Value Qty per reel - 900 Reel Size mm 330 Tape Width mm 16.00 Pitch mm 12.00 Ao mm 6.80 Bo mm 7.60 Ko mm 5.30 Orientation - F24 Reference Application Note ANI-019 for orientation 1. Dimensions in inches (mm). 2. Tolerance: .xx 0.02, .xxx 0.01 unless otherwise noted. 3. Model number and lot code are printed on the reel. 4. Plating finish: ENIG on both sides, 0.05 to 0.1 m gold over 3 to 6 m nickel 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: