MABACT0018 MACOM

MABACT0018 E-Series 1:4 RF Flux Coupled Transformer Rev. V3 5.0-200 MHz Features Product Image 1:4 Impedance CT on Secondary Surface Mount Available on Tape and Reel. Description M/A-COMs MABACT0018 is a 1:4 RF flux coupled step-up transformer in a low cost, surface mount package. Ideally suited for high volume cellular & wireless applications. Typical applications include single to balance mode conversion and impedance matching. Ordering Information Part Number Package MABACT0018 2000 piece reel Schematic Case Style: SM-138-A Pin No. Function 1 Secondary 2 Secondary CT 3 Secondary Dot 4 Primary Dot 5 Primary Dimensions in inches mm . Tolerance where not specified: .xx .02, .xxx .010 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MABACT0018 E-Series 1:4 RF Flux Coupled Transformer Rev. V3 5.0-200 MHz Electrical Specifications: T = 25C A Parameter Frequency (MHz) Units Typ Min Max - - - Frequency Range 5 - 65 - - - - 65 - 200 - dB 0.4 - Insertion Loss 5 - 65 0.7 dB 0.9 - 65 - 200 1.5 dB 0.02 - 0.1 Amp Balance 5 - 65 dB 0.20 - 0.5 65 - 200 Deg Phase Balance 5 - 65 0.4 - 2.0 Deg 2.0 - 8.0 65 - 200 Input Return Loss 22.0 15.0 - 5 - 65 dB 11.0 7.0 - 65 - 200 dB 1,2 Absolute Maximum Ratings Parameter Absolute Maximum RF Power 50 mW Peak IF Current 200 mA Storage Temperature -40 to +85 C Operating Temperature -40 to +85 C Pin Temp. (10sec) 260C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: